Comparison of Injection Characteristics and Droplet Distribution on Crude Palm Oil and Diesel Using CFD
Abstract
CPO (Crude Palm Oil) is a potential renewable
fuel as a substitute for fossil fuels used in internal combustion
engines. An important parameter that affects the combustion of
an engine with an injection system is the characteristics of the
fuel spray. This research was conducted using Computational
Fluid Dynamics (CFD) software to model the atomization
process that occurs when CPO and diesel fuel are injected with
a pressurized atomizer. The modeling shows the characteristics
of the spray which include the shape of the spray and the droplet
diameter distribution. These characteristics are presented with
spray images, droplet diameter distribution graphs, and velocity
distribution graphs. Simulations show that at temperatures
above 75°C and 100°C, CPO spray produces droplet shapes and
distributions that are almost the same as diesel spray. On the
other hand, diesel injection spray produces a lower droplet size.
The highest droplet size distribution is at 12-16 microns.
Keywords
Full Text:
PDFReferences
Mosarof, M. H., Kalam, M. A., Masjuki, H. H.,
Ashraful, A. M., Rashed, M. M., Imdadul, H. K., &
Monirul, I. M. “Implementation of palm biodiesel based
on economic aspects, performance, emission, and wear
characteristics”. Energy Conversion and Management,
, 617–629. 2015.
Susanto, D. A. “Daya saing ekspor produk CPO
Indonesia dan potensi hilirisasi diolah menjadi
biodiesel. Jurnal Perspektif Bea Dan Cukai, 4(2), 2020.
Lim, T. H., Bari, S., and Yu, C. W. “Using crude palm
oil (CPO) as diesel engine fuel”, ASEAN Journal on
Science and Technology for Development, 19(2), 1–13. Li, R., Wang, Z., Tang, C., and Meng, X. “Study on
particulate structure characteristics of diesel engines
fueled with a methanol/biodiesel blend. ACS Omega,
(9), 6081–6087. 2021.
Bari, S., and Hossain, S. N. “Performance and emission
analysis of a diesel engine running on palm oil diesel
(POD)”. Energy Procedia, 160, 92–99. 2019.
Sreenivasulu, N., Govindarajulu, K., John Samuel, K.,
Rajasekhar, Y., Edison, G., and Thundil Karuppa Raj,
R. (2016). Experimental investigation on engine
performance and emission characteristics using
pongamia - Orange oil blends. International Journal of
Renewable Energy Research, 6(1), 229–236. 2016.
Saputro, W., Sentanuhady, J., Majid, A. I., Prasidha, W.,
Gunawan, N. P., and Raditya, T. Y. “Karakteristik unjuk
kerja mesin diesel menggunakan bahan bakar B100 dan
B20 dalam jangka panjang, 2(2), 125–136, 2020.
Uludamar, E., Karaman, V., Yildizhan, S., and Serin, H.
“Improvement of Density, Viscosity and Cold Flow
Properties of Palm Oil Biodiesel by Alcohol Addition”.
International Journal of Engineering Technologies,
IJET, 2(2), 64. 2016.
Che Mat, S., Idroas, M. Y., Hamid, M. F., and Zainal,
Z. A. “Performance and emissions of straight vegetable
oils and its blends as a fuel in diesel engine: A review.
Renewable and Sustainable Energy Reviews, 82, 808–
2018.
Senthur Prabu, S., Asokan, M. A., Prathiba, S., Ahmed,
S., and Puthean, G. “Effect of additives on performance,
combustion and emission behavior of preheated palm
oil/diesel blends in DI diesel engine”. Renewable
Energy, 122, 196–205. 2018.
Ge, J. C., Yoon, S. K., and Song, J. H. “Comparative
evaluation on combustion and emission characteristics
of a diesel engine fueled with crude palm oil blends”.
Applied Sciences (Switzerland), 11(23). 2021.
Bravo, L., and Kweon, C. “A Review on liquid spray
models for diesel engine computational analysis
(droplet breakup). Army Research Laboratory, (May),
, 2014.
Alham Mahanggi, Sudarmanta, B., and Soebagyo, H.
"Experimental study on effect of injection pressure to
spray characteristics, performance and emissions of
diesel engine DI 20 C using biodiesel fuel. Journal of
Mechanical Engineering and Sciences, 2(1), 18–25.
Hoang, A. T., Le, A. T., and Pham, V. V. "A core
correlation of spray characteristics, deposit formation,
and combustion of a high-speed diesel engine fueled
with Jatropha oil and diesel fuel". Fuel, 244, 159–175.
Azad, A. K., Halder, P., Nanthagopal, K., and Ashok,
B. "Investigation of diesel engine in cylinder flow
phenomena using CFD cold flow simulation".
Advanced Biofuels: Applications, Technologies and
Environmental Sustainability, 329–336. 2019
DOI: http://dx.doi.org/10.32497/eksergi.v18i2.3225
Refbacks
- There are currently no refbacks.
Mechanical Engineering Department
Politeknik Negeri Semarang
Jl. Prof. Sudarto, SH., Tembalang, Semarang
Phone (024) 7478384; Fax: (024) 7472396
WA : 08112882883
Email: jurnal.eksergi@polines.ac.id
This work is licensed under a Creative Commons Attribution 4.0 International License.