Vol. 21 No. 1 (2026): Volume 21, Nomor 1, April 2026

View Vol. 21 No. 1 (2026): Volume 21, Nomor 1, April 2026

Jurnal Rekayasa Mesin (p-ISSN: 1411-6863, e-ISSN:2540-7678)

DOI: https://doi.org/10.32497/jrm.v21i1
Published: 2026-05-01

Front Matter

  • Front Matter Jurnal Rekayasa Mesin Vol. 21 No. 1 April 2026

    i-vi
    DOI: https://doi.org/10.32497/jrm.v21i1.7584

Articles

  • Numerical Study of Savonius Wind Turbine Performance at Tidar University under Wind Speed and Direction Angle Using the CFD Method

    Ahmad Izzudin Robani, Nurmala Dyah Fajarningrum, Raka Mahendra Sulistiyo, Fuad Hilmy, Andriyatna Agung Kurniawan
    1-16
    DOI: https://doi.org/10.32497/jrm.v21i1.7146

  • Evaluation of Burst Pressure on API X52 Pipes: Validation of Predictive Models via Full-Scale Experimental Data

    Teddy Setiawan, Dedy Triawan Suprayogi, Hadi Wahyudi
    17-22
    DOI: https://doi.org/10.32497/jrm.v21i1.7209

  • Characterization of the Material Produce by Wire Arc Additive Manufacturing GTAW Material AISI 308L

    Edi Sarwono, Dito Ardiyansyah
    23-30
    DOI: https://doi.org/10.32497/jrm.v21i1.7058

  • Limitations of Interlocking Features in Rotary Friction Welding (RFW) of 3D-printed PLA

    Fauzan Al Fathurrahman, Fathur Rahman Naufal Santoso, Erwin, Didik Sugiyanto, Juan Pratama
    31-38
    DOI: https://doi.org/10.32497/jrm.v21i1.7419

  • Effects of Welding Current and Material Thickness on Hardness and Tensile Strength of SPCC Steel Welded Using the Metal Inert Gas (MIG) Process

    Sutrisno Sutrisno, Yohanes Maria Astomo Dwi S, Aditya Nugraha, Adhi Setya Hutama, Rudi Kristianto, Yohanes Oscar Andrian
    39-50
    DOI: https://doi.org/10.32497/jrm.v21i1.7211

  • Design and Development of a Dual-Mode Smart Wheelchair Prototype with Obstacle Detection for Zimbabwe

    Savior Munotyaani, Nugroho Mamayu Hayuning Bawono, Nicholas Tayisepi, Innocent Mapindu, Paulus Wisnu Anggoro, Baju Bawono, Anugrah Kusumo Pamosoaji, Albertus Yustinus Novi Misgi Prabowo Adi
    51-66
    DOI: https://doi.org/10.32497/jrm.v21i1.6954

  • Optimisation of Preheating Temperature for Mechanical Performance of SMAW Welded ASTM A36 Steel

    Sumarji Sumarji, Agus Hariyanto, FX. Arif Wahyudianto, Agus Suprihanto
    67-74
    DOI: https://doi.org/10.32497/jrm.v21i1.7356

  • Design and Development of a Vertical-Shaft Organic Waste Chopper Machine with a Top-Mounted Agitator

    Herry Susanto, Yefri Chan, Juan Pratama, Rolan Siregar, Rio Ferdiansyah, Hidayat Mustofa, Muhammad Fauzan Mubarok
    75-92
    DOI: https://doi.org/10.32497/jrm.v21i1.7431

  • A Comparative Analysis of Epoxy Coating Quality on ASTM AH-36 Steel Plates Using Surface Preparation Methods

    Rahmat Hidayat, Rando Tungga Dewa, Thaha Yassin Ramadhan Utomo, Muhammad Rizky, Mariyan Maritza Ramadhan; Leander Berliano Farel Kristiyono; Ainur Rofiq
    93-104
    DOI: https://doi.org/10.32497/jrm.v21i1.7507

  • Thermodynamic Performance Study of Cascade Cooling Systems on Cruise Ships with Mixed Working Fluids and Operating Parameters

    Fajri Ashfi Rayhan, Deva Natasya
    105-116
    DOI: https://doi.org/10.32497/jrm.v21i1.7412

  • Enhancing Bed Alignment and Reducing Calibration Time in 3D Printers Using Auto Leveling with PI Control

    Andreanto Wongsoatmojo, Fransiskus Arjuna Davin Pratama, Ign. R. Haryosuprobo, Alexander Ariantono Nugroho, Bondan Wiratmoko Budi Santoso, Mardiatno
    117-128
    DOI: https://doi.org/10.32497/jrm.v21i1.7027

  • Impact of Endurance Testing on the Thermal Performance of a Retrofitted FDM 3D Printer

    Alexander Ariantono Nugroho, David Christanto, Laurentius Yudha Bramantyo, Bondan Wiratmoko Budi Santoso, Ign. R. Haryosuprobo, Mardiatno
    129-138
    DOI: https://doi.org/10.32497/jrm.v21i1.7025

  • The Influence of Asymmetric Load Distribution on V-Belt and Pulley Transmission in Belt Conveyor Systems

    Ade Irvan Tauvana, Syafrizal Syafrizal, Gilang Ramadhan
    139-148
    DOI: https://doi.org/10.32497/jrm.v21i1.7515

  • Analysis of Wear Resistance in Eco-Friendly Paving Blocks Utilizing Multilayer Aluminum–LDPE Plastic Waste

    Nani Mulyaningsih, Sri Hastuti, Hanafi Izzul, Bagas Tri
    149-158
    DOI: https://doi.org/10.32497/jrm.v21i1.7354

  • The Effect of Clay Tile Particle Addition on the Flame Retardancy and Impact Toughness of Ramie Fiber-Reinforced Polypropylene Composites

    Muhammad Gibrail, Sri Hastuti, R. Faiz Listyanda, Eko Saputra, Wahyu Nugroho, Farika Tono Putri, Ragil Tri Indrawati, Xander Salahudin
    159-168
    DOI: https://doi.org/10.32497/jrm.v21i1.7458

Back Matter

  • Back Matter Jurnal Rekayasa Mesin Vol. 21 No. 1 April 2026

    App.1-4
    DOI: https://doi.org/10.32497/jrm.v21i1.7586