Shell and Tube Heat Exchanger Design: Utilization of Wasted Energy in Air Conditioning Systems

Nanang Apriandi MS, Yusuf Dewantoro Herlambang, Abdul Syukur Alfauzi, ShunChing Lee

Abstract


This research aims to design a simple Shell and Tube (one pass) heat exchanger for applications in recovering wasted heat from air conditioning systems in the hospitality industry. The Tubular Exchanger Manufacturers Association (TEMA) standard is used as a reference in the design of heat exchangers in order to obtain the dimensional specifications of the device. In addition, mathematical calculations based on the technical properties of the working fluid are carried out with the help of the Microsoft Excel application to obtain values from other parameters in the design. The results showed that the designed heat exchanger met the standards in terms of device effectiveness. The heat exchanger has 152 tubes with an effective value of more than 90% with an impurity factor of 0.014. A high tool effectiveness value indicates a good heat exchanger performance. The results of this planning and design are expected to be a reference in designing an effective heat exchanger with high reliability.

Keywords


Effectiveness; heat exchanger; heat recovery; Shell and Tube; TEMA standar

Full Text:

PDF

References


M. Sahrul, I. M. Mahbubul, R. Saidur, S. S. Khaleduzzaman, M. F. Sabri, and M. M. Rahman. “Effectiveness study of a shell and tube heat exchanger operated with nanofluids at different mass flow rates”. Numerical Heat Transfer, Part A: Application: An International Journal of Computation and Methodology, vol. 66 (7), pp.699-713, 2014.

A. C. Caputo, P. M. Pelagagge, and P. Salini. “Heat exchanger design based on economic optimisation”. Applied Thermal Engineering, vol. 28, pp.1151-1159, 2008.

D. Q. Kern. “Process heat transfer”. McGraw-Hill, 1950.

W. M. Rosenhow, and P. J. Harnett. “Handbook of heat transfer”. McGraw-Hill, 1973.

R. K. Shah, and K. J. Bell. “The CRC handbook of thermal engineering”. CRC Press. 2000.

G. F. Hewitt (Ed.). “Heat exchanger design handbook”. New York: Begell House, 1998.

Y. A. Kara, and O. Guraras. “A computer program for designing of shell and tube heat exchangers”. Applied Thermal Engineering, vol 24, pp.1797-1805, 2004.

A. B. D. Nandiyanto, R. Ragadhita, and T. Kurniawan. “Shell and tube heat exchanger design for titanium dioxide particle production process”. Journal of Engineering Science and Technology, vol. 17, no. 5, pp. 3224-3233, 2022.

A. B. D. Nandiyanto, S. R. Putri, R. Ragadhita, and T. Kurniawan. “Design of heat exchanger for the production of carbon particles”. Journal of Engineering Science and Technology, vol. 17, no. 4, pp. 2788-2798, 2022.

N. T. D. Hidayah and A. B. D. Nandiyanto. “Shell and tube heat exchanger design for nano zeolit production process”. International Journal of Research and Applied Technology, vol. 1, no. 2, pp. 306-317, 2021.

M. P. Aprilia, A. B. D. Nandiyanto, T. Kurniawan, M. Fiandini dan R. Ragadhita. “Rancangan heat exchanger jenis shell and tube untuk produksi nanopartikel Fe3O4 skala industri menggunakan pemodelan matematis”. Jurnal Fraction, vol. 2, no. 2, pp. 46-52, 2022.

I. Milcheva, F. Hiberle, and D. Bruggemann. “Modeling and simulation of a shell-and-tube heat exhanger for organic rankine cycle systems with double-segmental baffels by adapting the Bell-Delaware method”. Applied Thermal Engineering, vol. 126, pp. 507-517, 2017.

A. Erdogan, C. O. Colpan, and D. M. Cakici. “Thermal design and analysis of a shell and tube heat exchanger integrating a geothermal based organic rankine cycle and parabolic trought solar collectors”. Renewable Energy, vol. 109, pp. 372-391, 2017.

D. Luo, Z. Wu, Y. Yan, D. Ji, Z. Cheng, R. Wang, Y. Li, and X. Yang. “Optimal design of a heat exchanger for automotive thermoelectric generator system applied to a passenger car”. Applied Thermal Engineering, vol. 227, 2023.

A. B. D. Nandiyanto, R. Ragadhita, and T. Kurniawan. “Design of laboratory scale water bath heat exchanger with shell and tube type”. Journal of Engineering Science and Technology, Special Issue on AASSEEEC2021, pp.49-56, 2021.

B. Masoumpour, M. Ataeizadeh, H. Hajabdollahi, and M. S. Dehaj. “Performance evaluation of a shell and tube heat exchanger with recovery of mass flow rate”. Journal of the Taiwan Institute of Chemical Engineers, vol. 123, pp. 153-165, 2021.

Y. A. Cengel. “Introduction to thermodynamics and heat transfer”. United States of America: McGraw-Hill, 1997.

K. Frank. “Prinsip-prinsip perpindahan panas”. Alih bahasa A. Prijono, Edisi Ketiga, Jakarta:Erlangga, 1986.




DOI: http://dx.doi.org/10.32497/eksergi.v19i2.4461

Refbacks

  • There are currently no refbacks.


Mechanical Engineering Department
Politeknik Negeri Semarang
Jl. Prof. Sudarto, SH., Tembalang, Semarang
Phone (024) 7478384; Fax: (024) 7472396

WA : 08112882883

Email: jurnal.eksergi@polines.ac.id

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

View Statistics View MyStat

slot gacor slot gacor hari ini slot gacor 2025 demo slot pg slot gacor slot gacor