CFD Simulation With Ansys Effect Of Twisted Tape Ratio On Nusselt Number and Reynold Number Solar Collector

singgah khairun okba; Ridwan Ridwan; Iwan Setyawan

doi:10.32497/eksergi.v18i3.3855

CFD Simulation With Ansys Effect Of Twisted Tape Ratio On Nusselt Number and Reynold Number Solar Collector

singgah khairun okba, Ridwan Ridwan, Iwan Setyawan

Abstract

Solar collector is one of the tools used to harness solar power and then convert it into heat which is used to heat water. The solar collector used is a flat plate type solar collector, the drawback of this solar collector is its low efficiency value. One method that can be used to increase its efficiency is to add twisted tape. Twisted tape serves to increase the value of the nusselt number and reynold number, where the increasing nusselt number and reynold number means the efficiency will increase, the Twisted Tape Ratio is the ratio between the distance of two peaks (H) and the width of the pipe (D). In this study using three variations of the tape ratio, namely 5,4, and 3, at Y = 5 the highest nusselt value and the Reynold number 4000 and Nuselt Number 24 were used, this is because the Twisted Tape ratio is 4 and 3 forms of twisted tape inhibit the flow. which causes a decrease in the value of the nusselt number and reynold number.

Keywords

Nusselt Number, Reynold number, Solar Collector, Twisted Tape, Twisted Tape Ratio

Full Text:

PDF

References

Alawi, O. A., et al. (2021). "Nanofluids for flat plate solar collectors: Fundamentals and applications." Journal of Cleaner Production 291: 125725.

Bezaatpour, M. and M. Goharkhah (2020). "Convective heat transfer enhancement in a double pipe mini heat exchanger by magnetic field induced swirling flow." Applied Thermal Engineering 167: 114801.

Bezaatpour, M. and H. Rostamzadeh (2020). "Heat transfer enhancement of a fin-and-tube compact heat exchanger by employing magnetite ferrofluid flow and an external magnetic field." Applied Thermal Engineering 164: 114462.

Bezaatpour, M. and H. Rostamzadeh (2021). "Simultaneous energy storage enhancement and pressure drop reduction in flat plate solar collectors using rotary pipes with nanofluid." Energy and Buildings 239: 110855.

Bezaatpour, M., et al. (2021). "Hybridization of rotary absorber tube and magnetic field inducer with nanofluid for performance enhancement of parabolic trough solar collector." Journal of Cleaner Production 283: 124565.

Brahim, T. and A. Jemni (2021). "Parametric study of photovoltaic/thermal wickless heat pipe solar collector." Energy Conversion and Management 239.

Mohseni-Gharyehsafa, B., et al. (2021). "Soft computing analysis of thermohydraulic enhancement using twisted tapes in a flat-plate solar collector: Sensitivity analysis and multi-objective optimization." Journal of Cleaner Production 314.

Nakhchi, M. E. and J. A. Esfahani (2019). "Performance intensification of turbulent flow through heat exchanger tube using double V-cut twisted tape inserts." Chemical Engineering and Processing - Process Intensification 141.

Nakhchi, M. E. and J. A. Esfahani (2020). "Numerical investigation of turbulent CuO–water nanofluid inside heat exchanger enhanced with double V-cut twisted tapes." [10]Journal of Thermal Analysis and Calorimetry 145(5): 2535-2545.

Pourfattah, F., et al. (2021). "On the optimization of a vertical twisted tape arrangement in a channel subjected to MWCNT–water nanofluid by coupling numerical simulation and genetic algorithm." Journal of Thermal Analysis and Calorimetry 144(1): 189-201.

Rezaei Miandoab, A., et al. (2022). "Numerical study of the effects of twisted-tape inserts on heat transfer parameters and pressure drop across a tube carrying Graphene Oxide nanofluid: An optimization by implementation of Artificial Neural Network and Genetic Algorithm." Engineering Analysis with Boundary Elements 140: 1-11.

Sharafeldin, M. and G. Gróf (2018). "Experimental investigation of flat plate solar collector using CeO2-water nanofluid." Energy Conversion and Management 155: 32-41.

Vengadesan, E. and R. Senthil (2020). "A review on recent development of thermal performance enhancement methods of flat plate solar water heater." Solar Energy 206: 935-961.

A. J. Gannon and T. W. Von Backstro, “Solar Chimney Cycle Analysis With System Loss and Solar Collector Performance,” J. Sol. Energy Eng., vol. 122, no. August, pp. 133–137, 2000.

P. K. Nagarajan, J. Subramani, S. Suyambazhahan, and R. Sathyamurthy, “Nanofluids for solar collector applications: A review,” Energy Procedia, vol. 61, pp. 2416–2434, 2014, doi: 10.1016/j.egypro.2014.12.017.

DOI: http://dx.doi.org/10.32497/eksergi.v18i3.3855

Refbacks

There are currently no refbacks.

Mechanical Engineering Department
Politeknik Negeri Semarang
Jl. Prof. Sudarto, SH., Tembalang, Semarang
Phone (024) 7478384; Fax: (024) 7472396

WA : 08112882883

Email: jurnal.eksergi@polines.ac.id

This work is licensed under a Creative Commons Attribution 4.0 International License.

View MyStat

Username
Password
Remember me