Biogas Desulfurization Using Iron Gram Waste Machining Practicum Process at The Department of Mechanical Engineering, Politeknik Negeri Semarang
Abstract
The important matter about biogas as an alternative energy source was the presence of hydrogen sulfide (H2S) which is very corrosive. The biogas desulfurization process was absolutely necessary to reduce the risk of damage to the equipment. For small-scale applications, the selection of the type of adsorbent became important to reduce additional costs. One alternative material that can be used was iron gram waste. The aim of this study was to investigate the use of iron gram waste resulting from the machining practicum process at the Department of Mechanical Engineering, Politeknik Negeri Semarang as an alternative material for making adsorbents. Iron gram waste was processed into Iron (III) Oxide (Fe2O3) and Iron (III) Hydroxide (Fe(OH)3), formed into billets with an average billet mass of 250 gr. The performance test of the adsorbent in the biogas desulfurization process was carried out under conditions of variation in the flow rate of biogas feed 1, 2, and 3 liters per minute, and the volume of biogas purified in one process was 50 liters. As a result, the most optimum performance was obtained in the test with a feed biogas flow rate of 1 liter/minute, with a percentage reduction in H2S levels contained in the biogas by an average of 82,56%.
Keywords
Full Text:
PDFReferences
N. Apriandi, “Analisa Biodigester Polyethilene Skala Rumah Tangga Dengan Memanfaatkan Limbah Organik Sebagai Sumber Penghasil Biogas,” Orbith, vol. 17, no. 1, pp. 23–29, 2021.
N. Apriandi, I. G. B. W. Kusuma, and I. M. Widiyarta, “Pemurnian Biogas Terhadap Gas Pengotor Karbondioksida (CO2 ) Dengan Teknik Absorbsi Kolom Manometer (Manometry Column),” Logic, vol. 13, no. 1, pp. 55–60, 2013.
T. G. T. Nindhia, K. M. T. Negara, I. M. Sucipta, I. W. Surata, I. K. A. Atmika, and D. N. K. P. Negara, “Performance of Repetitive Type of Biogas Desulfurizer Made from Steel Chips Waste,” in Proceedings of the 2nd International Converence on Sustainable Technology Development, 2012, pp. 63–69.
A. G. Georgiadis, N. D. Charisiou, and M. A. Goula, “Removal of hydrogen sulfide from various industrial gases: A review of the most promising adsorbing materials,” Catalysts, vol. 10, no. 5. MDPI, May 01, 2020. doi: 10.3390/catal10050521.
M. Lincke, U. Petasch, U. Gaitzsch, A. Tillmann, M. Tietze, and F. Niebling, “Chemoadsorption for Separation of Hydrogen Sulfide from Biogas with Iron Hydroxide and Sulfur Recovery,” Chemical Engineering and Technology, vol. 43, no. 8, pp. 1564–1570, Aug. 2020, doi: 10.1002/ceat.202000032.
L. H. de Oliveira et al., “H2S adsorption on NaY zeolite,” Microporous and Mesoporous Materials, vol. 284, pp. 247–257, Aug. 2019, doi: 10.1016/j.micromeso.2019.04.014.
N. Thanakunpaisit, N. Jantarachat, and U. Onthong, “Removal of Hydrogen Sulfide from Biogas using Laterite Materials as an Adsorbent,” in Energy Procedia, 2017, vol. 138, pp. 1134–1139. doi: 10.1016/j.egypro.2017.10.215.
A. H. Abdullah, R. Mat, A. S. A. Aziz, and F. Roslan, “Use of kaolin as adsorbent for removal of hydrogen sulphide from biogas,” Chemical Engineering Transactions, vol. 56, pp. 763–768, 2017, doi: 10.3303/CET1756128.
Fahriansyah, Sriharti, and M. Andrianto, “Peningkatan Gas Metana dan Nilai Kalori Bahan Bakar Biogas Melalui Proses Pemurnian Dengan Metode Tiga Lapis Adsorpsi Bahan Padat,” Jurnal Riset Teknologi Industri, vol. 13, no. 2, pp. 182–191, 2019.
Y. Suprianti, “Pemurnian Biogas untuk meningkatkan Nilai Kalor melalui Adsorpsi Dua Tahap Susunan Seri dengan Media Karbon Aktif,” Jurnal Elkomika, vol. 4, no. 2, pp. 185–196, 2016.
A. Widyastuti, B. Sitorus, and A. Jayuska, “Karbon Aktif Dari Limbah Cangkang Sawit Sebagai Adsorben Gas Dalam Biogas Hasil Fermentasi Anaerobik Sampah Organik,” JKK, vol. 2, no. 1, pp. 30–33, 2013.
T. G. T. Nindhia, I. W. Surata, I. D. G. P. Swastika, and P. Widiana, “Processing zinc from waste of used zinc-carbon battery with natrium chloride (NaCl) for biogas desulfurizer,” in Key Engineering Materials, 2016, vol. 705, pp. 368–373. doi: 10.4028/www.scientific.net/KEM.705.368.
T. G. T. Nindhia, I. W. Surata, I. K. A. Atmika, D. N. K. P. Negara, and I. P. G. Artana, “Processing Carbon Rod from Waste of Zing-Carbon Battery for Biogas Desulfurizer,” Journal of Clean Energy Technologies, vol. 3, no. 2, pp. 119–122, 2015, doi: 10.7763/jocet.2015.v3.179.
T. G. T. Nindhia, I. W. Surata, and R. Antara, “Pemanfaatan Limbah Cangkang Tiram Untuk Memurnikan Biogas Dari Pengotor Karbondioksida,” Buletin Udayana Mengabdi, vol. 16, no. 1, pp. 128–132, 2017.
S. M. Rambe and E. H. Sipahutar, “Rekayasa Adsorben Dari Limbah Serbuk Besi Untuk Penyerapan H2S Dalam Biogas,” Jurnal Teknik dan Teknologi, vol. 11, no. 22, pp. 13–19, 2016.
M. R. Pelaez-Samaniego, J. F. Perez, M. Ayiania, and T. Garcia-Perez, “Chars from wood gasification for removing H2S from biogas,” Biomass and Bioenergy, vol. 142, Nov. 2020, doi: 10.1016/j.biombioe.2020.105754.
K. M. T. Negara et al., “Pemurnian Biogas Dari Gas Pengotor Hidrogen Sulfida (H2S) Dengan Memanfaatkan Limbah Geram Besi Proses Pembubutan,” Jurnal Energi dan Manufaktur, vol. 5, no. 1, pp. 33–41, 2012.
DOI: http://dx.doi.org/10.32497/eksergi.v18i3.3785
Refbacks
- There are currently no refbacks.
Mechanical Engineering Department
Politeknik Negeri Semarang
Jl. Prof. Sudarto, SH., Tembalang, Semarang
Phone (024) 7478384; Fax: (024) 7472396
WA : 08112882883
Email: jurnal.eksergi@polines.ac.id
This work is licensed under a Creative Commons Attribution 4.0 International License.