Prototype of Monitoring and Controlling System on Gondola Cage Security Based Android Application

Brainvendra Widi Dionova, Devan Junesco Vresdian, Anindya Ananda Hapsari, Sigit Budi Priyono, Ayu Nurul Haryudiniarti, Anggita Nafiulana Tri, Mauludy Manfaluthy, Mohammed N. Abdulrazaq

Abstract


Gondola is one of the facilities used in high-rise buildings that are used to access the outside of the building. Gondola has a maximum load limit that is safe to transport it. Gondola is also often damaged in the cage caused by collisions on the side of the building. Until now, the gondola control still uses buttons which also often experience problems. This study aims to provide monitoring of the cage load and provide information about the distance of the cage to surrounding objects. Gondola control through an android application also includes this research in order to provide an alternative if the buttons on the gondola control experience problems. The short-term goal of this research is to carry out an innovation in the gondola field by conducting experiments through prototypes. The medium term goal is to apply the results of this research into a gondola. The results of this study control and monitoring can function properly even though the results produced are not yet accurate due to the imperfect quality of components, materials and assembly.

Keywords


android, gondola, monitoring and controlling system.

Full Text:

PDF

References


PT. Mitragondola Kreasiprima, “Mengetahui Fungsi Gondola Dengan

Lebih Lengkap,” 2019.

Estandia, A., and Hutter, M., “Robust damping of a ropeway gondola’s

wind oscillations with an actuated mass,” IEEE Int. Conf. Intell. Robot.

Syst., vol. 2017, pp. 4597–4604, 2017.

Yoo, S., et al., “Unmanned high-rise façade cleaning robot

implemented on a gondola: Field test on 000-building in korea,” IEEE

Access, vol. 7, no. c, pp. 30174–30184, 2019.

“Prototype of Monitoring and Controlling System on Gondola Cage

Security Based Android Application.”

Chae, H., et al., “Façade Cleaning Robot with Manipulating and

Sensing Devices Equipped on a Gondola,” IEEE/ASME Trans.

Mechatronics, vol. 26, no. 4, pp. 1719–1727, 2021. Rumah,” J. Teknol. Inform. dan Komput., vol. 7, no. 1, pp. 134–145,

Dionova, B. W., Mohammed, M. N., Al-Zubaidi, S., and Yusuf, E.,

“Environment indoor air quality assessment using fuzzy inference

system,” ICT Express, vol. 6, no. 3, pp. 185–194, 2020.

Hapsari, A. A., Hajamydeen, A. I.,, and Abdullah, M. I., “A Review on

Indoor Air Quality Monitoring using IoT at Campus Environment,” Int.

J. Eng. Technol. 7 55-60, vol. 7, pp. 55–60, 2018.

Hapsari, A. A., Vresdian, D. J., Aldiansyah, M., Dionova, B. W., and

Windari, A. C., “Indoor Air Quality Monitoring System with Node.js

and MQTT Application,” Proceeding - 1st Int. Conf. Inf. Technol. Adv.

Mech. Electr. Eng. ICITAMEE 2020, pp. 144–149, 2020.

Pangestu, A., Mohammed, M. N., Al-Zubaidi, S., Bahrain, S. H. K.,

and Jaenul, A., “An internet of things toward a novel smart helmet for

motorcycle: Review,” AIP Conf. Proc., vol. 2320, no. March, 2021.

Suwarti, Mulyono, Haqqi, M., and N. R. TR, “Monitoring Potensi

Energi Angin Dan Matahari Di Lingkungan Politeknik Negeri

Semarang Berbasis Android Dengan Aplikasi Blynk,” Eksergi, vol. 16,

no. 1, pp. 1–12, 2020.

Mohammed, M., Dionova, B. W., Al-Zubaidi, S., Bahrain, S. H. K.,

and Yusuf, E., “An IoT-Based Smart Environment for Sustainable

Healthcare Management”, vol. 1. Taylor & Francis Group.

Haryudiniarti, A. N., et al., “Perbaikan Waktu Kerja Dengan

Menggunakan Micromotion Study dan Penerapan Kaizen Dalam

Meningkatkan Produktifitas Di Perusahaan Mainan Anak PT. XY,” J.

Margana and Sumarno, F. G., “Kontrol Manual Dan Otomatis Pada Generator Set Dengan Menggunakan Mikrokontroler Melalui,” vol.13, no. 2, pp. 44–49, 2017.

Desryanti, E., “Otomasi Alat Proteksi Beban Muatan Berlebih

Menggunakan Load Cell Berbasis Atmega328,” 2018.

Haqiqi, M. M. E., Rukmana, A., and Ikhsan, A. F., “Rancang Bangun

Sistem Peringatan Dini Perlintasan Kereta Menggunakan Sensor

Ultrasonik Hc-Sr04 Dan Arduino Design a Train Crossing Early

Warning System Using Ultrasonic Sensor HC-SR04 and Arduino” ,

Jurnal FUSE – TE, vol. 1, no. 1, pp. 3–9, 2021.




DOI: http://dx.doi.org/10.32497/eksergi.v18i2.3498

Refbacks

  • There are currently no refbacks.


Mechanical Engineering Department
Politeknik Negeri Semarang
Jl. Prof. Sudarto, SH., Tembalang, Semarang
Phone (024) 7478384; Fax: (024) 7472396

WA : 08112882883

Email: jurnal.eksergi@polines.ac.id

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

View Statistics View MyStat