Vol. 20 No. 3 (2025): Volume 20, Nomor 3, Desember 2025

View Vol. 20 No. 3 (2025): Volume 20, Nomor 3, Desember 2025

Jurnal Rekayasa Mesin (p-ISSN: 1411-6863, e-ISSN:2540-7678)

DOI: https://doi.org/10.32497/jrm.v20i3
Published: 2025-12-30

Front Matter

  • Front Matter Jurnal Rekayasa Mesin Vol. 20 No. 3 December 2025

    i-vi
    DOI: https://doi.org/10.32497/jrm.v20i3.7336

Articles

  • Corrosion Behavior of Al6061-T6 by GTAW with Different Filler Metals

    Suherman Suherman, Muharnif, Riadini Wanty Lubis, Irfansyah, Wahyudianto F.X.A
    351-358
    DOI: https://doi.org/10.32497/jrm.v20i3.6496

  • Mechanical Contact Stress Analysis of Rollers at Various Hot Rolling Reductions Using Finite Element Approach

    Agung Fauzi Hanafi, Ansor Salim Siregar, Prabuditya Bhisma Wisnu Wardhaanaa, Mega Lazuardi Umar
    359-368
    DOI: https://doi.org/10.32497/jrm.v20i3.7190

  • Analysis of the Effect of Adding Insulators to Reservoirs Tank on Heat Losses as a Result of the Heat Exchanger System (Double Tube) for Water Heater

    Nailul Atifah, Dian Wiranda Tahami, Fifit Astuti
    369-378
    DOI: https://doi.org/10.32497/jrm.v20i3.7119

  • Performance Enhancement of 2D CNN-Based Visual Inspection Using Data Augmentation for Defect Classification in Metal Casting Products

    Imaduddien Ariefa, Hutomo Jiwo Satrio, Della Kumalaningrum, Rieky Handoko, Anton Harseno, Fariz Wisda Nugraha
    379-392
    DOI: https://doi.org/10.32497/jrm.v20i3.7170

  • Optimization of Surface Roughness in CNC Turning of SS 304 Stainless Steel Using Respon Surface Methodology

    Toto Aiwa, Husman, Zaldy Kurniawan
    393-400
    DOI: https://doi.org/10.32497/jrm.v20i3.7169

  • Utilization of Moringa Fruit Peel Waste and Sawdust as Hybrid Composite Boards with Polyester Resin Matrix

    Kristina Tresia Leto, Jayadin, Mastura Ridwan, Sri Astuti Rahman Coa, Kartini Rahman Nisa, Muhammad Mujiburohman, Ismiralda Ismiralda, Zakaria Al Farizi
    401-412
    DOI: https://doi.org/10.32497/jrm.v20i3.6941

  • Optimization of Spot Welding Parameters on Shear Tensile Strength of 0.9 mm SPCC Material using the Taguchi Methods

    Yudha Samodra, Adhi Setya Hutama, Perwita Kurniawan, Winastwan Sista Hayu, Th. Adi Nugroho
    413-420
    DOI: https://doi.org/10.32497/jrm.v20i3.7032

  • Effect of Magnesium Variation on Microstructure and Mechanical Properties of Aluminum Recycled Alloys

    Destri Muliastri, Mahir Ruardhian, Ilham Azmy
    421-434
    DOI: https://doi.org/10.32497/jrm.v20i3.6664

  • Performance Test of Airbus A380-like using GAMA Water Tunnel and Numerical Approach

    Syafria Wildan Hadi, Fauzun, Ata Syifa' Nugraha, Feri Hidayatulloh, Miftah Hijriawan
    435-444
    DOI: https://doi.org/10.32497/jrm.v20i3.7159

  • Analysis of Sawdust and Coal Biomass Fuel Variations on the Efficiency of 660 MW Multistage Turbine Steam Power Plant

    Mokh Ausin Al Qoroni, Radissa Dzaky Issafira, Muhammad Daru Fatkhur Rizki, Vrischo Candra Kumara Wardana
    445-454
    DOI: https://doi.org/10.32497/jrm.v20i3.6549

  • Effect of Build Plate Material and Temperature on Adhesion Performance in Fused Filament Fabrication of HIPS and PP

    Bondan Wiratmoko Budi Santoso, Andreas Sugijopranoto, Budi Arifvianto, Muslim Mahardika, Th. Adi Nugroho, Paulus Wisnu Anggoro
    455-466
    DOI: https://doi.org/10.32497/jrm.v20i3.6716

  • Design and Performance Testing of a Keychain Product Mold for a Learning Module in the Metrology and Plastic Moulding Laboratory at XYZ

    Timotius Anggit Kristiawan, Trio Setiyawan, Farika Tono Putri, Atikah Ayu Janitra, Abdul Syukur Alfauzi, Iman Mujiarto, Dieta Wahyu Asry Ningtias
    467-474
    DOI: https://doi.org/10.32497/jrm.v20i3.6563

  • Design of Jominy Hardenability Testing Equipment in Accordance with ASTM A255 Standard

    Rizky Muhammad Isdy, R. Faiz Listyanda, M. Fendy Kussuma Hadi Sufyan, Her Tafga Arfanindita, Ikhwan Taufik
    475-482
    DOI: https://doi.org/10.32497/jrm.v20i3.7149

  • Optimization of Manufacturing Parameters for Below-Knee Prosthetic Sockets Based on 3D Printing Using the Taguchi Method

    Higan Pilargenta , Wahyu Dwi Lestari
    483-496
    DOI: https://doi.org/10.32497/jrm.v20i3.6565

  • Two-Degree-of-Freedom Flow-Induced Vibrations of an Elastically-Mounted Cylinder under Oscillatory Flow: A Numerical Study

    Elfrida Rizky Riadini, Avicenna An-Nizhami, Padang Yanuar, Amran Yobioktabera, Muttabik Fathul Lathief
    497-512
    DOI: https://doi.org/10.32497/jrm.v20i3.7102

  • Evaluation of a Nylon 3D-Printed Wrist Splint Through Finite Element Analysis (FEA) and User-Based Assessment

    Juan Pratama, Ardhito Yogie Anggara, Ganang Arya Saputra, Didik Sugiyanto, As'yari
    513-520
    DOI: https://doi.org/10.32497/jrm.v20i3.7126

Back Matter

  • Back Matter Jurnal Rekayasa Mesin Vol. 20 No. 3 December 2025

    App.1-4
    DOI: https://doi.org/10.32497/jrm.v20i3.7338