ALAT PENGAMAN KENDARAAN BERMOTOR BERBASIS INTERNET OF THINGS
DOI:
https://doi.org/10.32497/orbith.v19i3.5255Keywords:
Buzzer, ESP 32, ESP CAM, GPS Sensor Module, LED, PIR Sensor Module, Telegram, Vibration Sensor Module, Wireless RelayAbstract
Alat Pengaman Kendaraan Bermotor Berbasis Internet of Things merupakan inovasi keamanan kendaraan bermotor yang dapat dipantau dan dikendalikan melalui gawai sehingga dapat mengurangi dan mencegah tindak pencurian kendaraan bermotor. Alat ini telah berhasil didesain dan dirancang menggunakan ESP 32 sebagai pengendali utamanya. Kontak wireless relay digunakan sebagai pengganti kunci konvesional. Komponen penting lain yang digunakan adalah ESP CAM yang digunakan untuk mengambil tangkapan wajah pengendara. Selain itu beberapa sensor digunakan seperti sensor GPS untuk melacak lokasi kendaraan, sensor vibration yang digunakan untuk mendeteksi guncangan pada kendaraan dan sensor PIR yang diigunakan untuk mendeteksi pergerakan disekitar kendaraan. Buzzer merupakan indikator apabila terjadi tindak pencurian. Untuk memantau alat pengaman ini dapat dilakukan menggunakan aplikasi Telegram.
Kata kunci : Buzzer, ESP 32, ESP CAM, LED, Modul Sensor GPS, Modul Sensor PIR, Modul Sensor Vibration, Telegram, Wireless Relay.
Motor Vehicle Safety Equipment Based on the Internet of Things is a motor vehicle safety innovation that can be controlled and monitored through a device so that it can reduce and prevent motor vehicle theft. ESP 32 was used as the primary controller in the successful design of this tool. Instead of conventional keys, wireless relay contacts are used. The ESP CAM, which is used to capture the rider's face, is another important component. Additionally, a number of sensors are used, including a GPS sensor to track the location of the vehicle, a vibration sensor to detect shocks outside, and a PIR sensor to detect movement around the vehicle. Buzzers are indicators of theft. To control this security tool can be done using the Telegram application.
Keywords : Buzzer, ESP 32, ESP CAM, GPS Sensor Module, LED, PIR Sensor Module, Telegram, Vibration Sensor Module, Wireless Relay.
References
Andrianto, H., & Darmawan, A. (2017). Arduino Belajar Cepat dan Pemrograman. Bandung: Informatika. 91-93.
Arifianto, D. (2011). Kamus Komponen Elektronika. Jakarta Selatan: PT Kawan Pustaka. Hal 122
A Kurniawan , (2016), Mengenal Microsft Azure IoT, Pertama Jakarta : PT. Elex Media Komputindo.
Bedir Tekinerdogan, liang-Jie Zhang, (2020), “Internet of Things-ICIOT 2022”, Springer Nature Switzerland AG , hal 125.
Dataku. 2018. Jumlah Kasus Pencurian : Data Vertikal Kepolisian Republik Indonesia Daerah. Diakses pada 21 Agustus 2022. dari http://bappeda.jogjaprov.go.id/dataku/dat a_dasar/index/447-jumlah-kasus- pencurian?id_skpd=39 .
Hidayatullah, S.,(2020), Pengertian Buzzer Elektronika Beserta Fungsi dan Prinsip Kerjanya, Kualalumpur : belajar online , hal 10-11
Irfan, D., & Basri, I. Y. (2018). Komponen Elektronika. Padang: Sukabumipress. 65-66.
Microcontroller Lab., (2022),RDM6300 RFID Reader interfacing with ESP32, Burlington: Microcontroller Lab. 1
Neil, K. (2018). Kolban's Book on ESP32. Texas. 52-53
Rafiuddin, S. (2013). Seri Buku Ajar Dasar- Dasar Teknik Sensor. Makassar: Fakultas Teknik Universitas Hasanuddin. Hal 54.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
