SIMULASI ANTENA MIKROSTRIP RECTANGULAR PATCH ARRAY 1X2 UNTUK ACCESS POINT TP-LINK FREKUENSI 2.4 GHz
DOI:
https://doi.org/10.32497/orbith.v18i3.4372Keywords:
antena mikrostrip, CST 2019, Gain, return loss, VSWR, microstrip antennaAbstract
Antena mikrostrip merupakan antena kecil berbentuk lempengan yang dapat dibuat dari plat PCB yang terdiri atas tiga elemen, yaitu paradiasi (radiator), elemen substrat (substrate) dan elemen pertanahan (ground). Antena berfungsi untuk memberikan akses internet pada jaringan lokal yang terhubung dengan access point TP-link untuk proses transmisi data. Antena yang digunakan pada access point merupakan antena mikrostrip rectangular patch array 1x2 yang bekerja pada frekuensi 2.4 GHz, dirancang menggunakan software CST 2019. Hasil simulasi antena untuk parameter return loss menunjukkan nilai sebesar -35.80 dB dan VSWR sebesar 1.03 dengan nilai gain sebesar 5.12 dB. Hasil simulasi antena mikrostrip rectangular patch array 1x2 sesuai dengan spesifikasi yang diperlukan sebagai antena pengganti access point TP-link untuk mengirimkan data kadar garam dan suhu aquarium ikan badut.
Kata kunci : Antena mikrostrip, CST 2019, Gain, Return loss, VSWR.
Mikrostrip antenna is a small slab shaped antenna tht can be made from PCB plates consisting of three elements, namely radiation, subtrate, and ground element. The anntenas serves to provide internet access on the local netwrok connected to the Tp-Link access point for the data transmission process. The antenna used is a 1x2 rectangular patch array microstrip antenna that works at a frequency of 2.4 GHz, designed using CST 2019 software. The antenna simulation results for the return loss parameter show a value of -35.80 dB and a VSWR of 1.03 with a gain value of 5.12 dB. Smulation result of rectangular patch array 1x2 microstrip antenna to replace the Tp-link access point to transmit salt content and temperature data for the clown fish aquarium.
Keywords : Microstrip antenna, CST 2019, Gain, Return loss, VSWR.
References
Bagus, B. and Bagaskara, A.Y. (2020) ”˜Perancangan Antena Mikrostrip Rectangular Patch Sebagai Penerima Televisi”™, Jurnal Penelitian, 5(1), pp. 11”“20.
Christyono, Y., Santoso, I. and Cahyo, R. D. (2016) ”˜Perancangan antena mikrostrip array pada frekuensi 850 MHz”™, Transmisi, 18(2), pp. 87”“95.
Dewantoro, A. N. (2011) Perancangan Dan Analisis Antena Jaringan Area LokalNirkabel 2,4 Ghz”™, pp. 2”“9.
Irtawaty, A. S., Ulfah, M. and Hadiyanto, H. (2018) ”˜Pengaruh Beamwidth, Gain dan Pola Radiasi terhadap Performansi Antena Penerima”™, JTT (Jurnal Teknologi Terpadu), 6(1), p. 14.
Amri, S., Triyono, J. and K, R. Y. R. (2017)”˜Admin-Journal Manager- 22-34 Safrial-Amri- Joko Yuliana”™, 3(2), pp. 22”“34.
Trisnawan, T. and Kristiyana, S. (2017) ”˜Rancang Bangun Elemen Antena Patch Spektrum Sebar Menggunakan Aplikasi CST Microwave Studio”™, Jurnal Elektrikal, 4(2), pp. 11”“19.
Fadhli, J. (2013) ”˜Analisis Penerapan Teknologi Jaringan Lte 4G Di Indonesia Fadhli Fauzi, Gevin Sepria Harly, Hanrais Hs”™, Majalah Ilmiah UNIKOM, 10(2), pp. 281”“290.
Puspitasari, N. F. and Pulungan, R. (2015) ”˜Optimisasi Penempatan Posisi Access Point pada Jaringan Wi-Fi Menggunakan Metode Simulated Annealing”™, Creative Information Technology Journal, 2(1), p. 51.
Jalaluddin, Imansyah, F. and F. Trias, P. W. (2020) ”˜Analisis Performansi Jaringan dan Kualitas Sinyal 4G LTE Telkomsel di Area Fakultas Teknik Untan Pontianak”™, Jurnal Teknik Elektro Universitas Tanjungpura, 2(1), pp. 1”“10.
Sumpena, M. R., Madiawati, H. and Elisma (2020) ”˜Desain Antena Susun Mikrostrip Rectangular Patch 4x2 Untuk Aplikasi 5G”™, Prosiding The 11th Industrial Research Workshop and National Seminar, pp. 591”“595.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).