PENGUJIAN JAM VEKTOR HUBUNGAN ZIG-ZAG TRANSFORMATOR DAYA TIGA FASA 3x50 VA 220 V

Authors

  • Hery Setijasa Jurusan Teknik Elektro, Politeknik Negeri Semarang

DOI:

https://doi.org/10.32497/orbith.v18i3.4367

Keywords:

transformator, bintang, segitiga, zigzag, transformer, star, triangle

Abstract

Praktikum transformator 3 fasa dalam Mata Kuliah Teknik Tenaga Listrik (TTL) di Jurusan Teknik Elektro POLINES diselenggarakan untuk hubungan kumparan primer dan sekunder dalam konfigurasi segitiga-segitiga, bintang-bintang, segitiga-bintang, bintang-segitiga dengan jam grup vektor yang hanya terbatas pada jam-jam tertentu, dan belum sampai pada 12 jenis jam vektor grup. Disamping itu belum bisa dilakukan praktikum transformator 3 fasa dalam konfigurasi zig-zag, karena belum tersedia transformator yang memiliki tiga belitan. Target khusus dari penelitian ini yaitu menghasilkan rekomendasi untuk penguatan dalam melakukan percobaan transformator 3 fasa pada semua jam grup vektor dari hubungan kumparan primer dan sekunder. Luaran penelitian ini berupa publikasi artikel jurnal ilmiah mengenai jam grup vektor dan diagram rangkaian transformator 3 fasa dari 3 buah transformator 1 fasa untuk 12 jenis jam grup vektor dalam konfigurasi segitiga-zigzag dan bintang-zigzag.

Kata kunci : Transformator, Bintang/Segitiga/Zigzag.

3-phase transformer practicum in Electrical Power Engineering (TTL) in the Department of Electrical Engineering POLINES Electrical Engineering is held for primary and secondary coil connections in the configuration of triangles, stars, triangles, stars, with vector group clocks that are only limited to certain hours, and have not arrived at 12 types of group vector clocks. Besides that, it is not possible to practice a 3-phase transformer in a zig-zag configuration, because there is no transformer with three windings available. The specific target of this research is to produce recommendations for strengthening in conducting experiments with 3-phase transformers on all clock vector groups from primary and secondary coil connections. The output of this research is the publication of scientific journal articles regarding vector group clocks and 3-phase transformer circuit diagrams from 3 single-phase transformers for 12 types of vector group clocks in triangle-zigzag and star-zigzag configurations.

Keyword : Transformer, Star/Triangle/Zigzag.

 

References

Harlow, James.H, 2004, Electric Power Transformer Engineering, CRC Press LLC, Florida.

J. Nagrath, DP.Kothari, 1989, Electric Machines, New Delhi, Tata Mc Graw Hill Publishing Co.Ltd.

”¦”¦, 2010, Jobsheet Semester IV: Praktikum Teknik Tenaga Listrik, Teknik Elektro Politeknik Negeri Semarang.

Leonard R. Andersen, Jack Macneill, Electric Machines and Transformers, 1988, New Jersey, Prentice Hall Inc. Englewood Cliffs.

PT. PLN (PERSERO), 2010, Buku 4 : Standar Konstruksi Gardu Distribusi dan Gardu Hubung Tenaga Listrik, Edisi 1, Jakarta.

Theraja BL, 1987, Textbook Electrical Technology, New Delhi, Ninja Construction and Development Co. Ltd. Ran Nagar.

Yakob Liklikwatil, 2014, Mesin-Mesin Listrik Untuk Program D3, Deepublish IKAPI, Yogyakarta.

http://budi54n.wordpress.com/2010/.

/vektor-jam-vektor-grup-trafo-3-fasa- 2-belitan.html.

http://dunialistrik.blogspot.co.id/2009/ 05/ konfigurasi-hubungan- belitan.html.

http://electricalnotes.wordpress.com/2 012/05/23/vector-group-of- transformer.html.

http://electricmechanic.blogspot.com/ 2013/10/jenis-hubungan-pada- belitan.html.

http://listrikpraktis.blogspot.co.id/201 5/12/cara-memahami-pembacaan- vektor-group-jam-trafo.html.

Downloads

Published

2023-04-13

Issue

Vol. 18 No. 3 (2022): November 2022

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).