Kajian Kelayakan Sifat Mekanik Produk 3D Printing FDM Berfilamen eFlex TPU-95A untuk Aplikasi Polisi Tidur
Abstract
Keywords
Full Text:
PDFReferences
A. Sidiq, G. R. F. Syahrillah, and M. . Isra, “Studi Experimental Pemanfaatan Speed Bamper (Polisi Tidur) Menjadi Energi Listrik Menggunakan Piezoelektrik,” Al-Jazari J. Ilm. Tek. Mesin, vol. 6, no. 2, 2021, doi: 10.31602/al-jazari.v6i2.6055.
S. R. Samal, M. Mohanty, and D. R. Biswal, “A review of effectiveness of speed reducing devices with focus on developing countries,” Trans. Transp. Sci., vol. 13, no. 1, pp. 65–73, 2022, doi: 10.5507/tots.2021.018.
Menteri Perhubungan Republik Indonesia, Peraturan Menteri Perhubungan Republik Indonesia Nomor PM 14 Tahun 2021 Tentang Perubahan Atas Peraturan Menter! Perhubungan Nomor Pm 82 Tahun 2018 Tentang Alat Pengendali dan Pengaman Pengguna Jalan. Indonesia: BN.2021/No.408, jdih.dephub.go.id : 24 hlm., 2021, p. 90. [Online]. Available: https://peraturan.bpk.go.id/Details/169237/permenhub-no-14-tahun-2021
M. M. Parmar, “Non-Newtonian Fluid Speed Breaker,” Int. J. Res. Appl. Sci. Eng. Technol., vol. 9, no. VI, pp. 827–831, 2021, doi: 10.22214/ijraset.2021.35250.
A. Setiawan and N. Chayati, “Efektifitas Polisi Tidur (Road Humps) dalam Mereduksi Kecepatan pada Ruas Jalan H.M. Syarifudin di Kota Bogor,” J. Komposit J. Ilmu-ilmu Tek. Sipil, vol. 7, no. 1, pp. 17–23, 2023, [Online]. Available: http://dx.doi.org/10.32832/komposit.v7i1.8029
L. Di Angelo, P. Di Stefano, A. Dolatnezhadsomarin, E. Guardiani, and E. Khorram, “A reliable build orientation optimization method in additive manufacturing: the application to FDM technology,” Int. J. Adv. Manuf. Technol., vol. 108, no. 1–2, pp. 263–276, 2020, doi: 10.1007/s00170-020-05359-x.
G. S. Lubis, M. Taufiqurrahman, and M. Ivanto, “Analisa Pengaruh Parameter Proses Terhadap Uji Tarik Produk Hasil 3D Printing Berbahan Polylatic Acid,” J. Engine Energi, Manufaktur, dan Mater., vol. 5, no. 2, p. 39, 2021, doi: 10.30588/jeemm.v5i2.877.
P. Pristiansyah, H. Hasdiansah, and A. Ferdiansyah, “Pengaruh Parameter Proses Pada 3D Printing FDM Terhadap Kekuatan Tarik Filament ABS CCTREE,” Manutech J. Teknol. Manufaktur, vol. 14, no. 01, pp. 15–22, 2022, doi: 10.33504/manutech.v14i01.210.
M. H. Nadhif et al., “Anatomically and Biomechanically Relevant Monolithic Total Disc Replacement Made of 3D-Printed Thermoplastic Polyurethane,” Polymers (Basel)., vol. 14, no. 19, 2022, doi: 10.3390/polym14194160.
J. Pratama and A. Z. Adib, “Pengaruh Parameter Cetak Pada Nilai Kekerasan Serta Akurasi Dimensi Material Thermoplastic Elastomer (TPE) Hasil 3D Printing,” J. Ilm. Giga, vol. 25, no. 1, p. 35, 2022, doi: 10.47313/jig.v25i1.1712.
D. Mardiyana, Z. Sulaiman, S. Ihsan, F. Ridha, and T. Rahman, “Rancang Bangun 3D Printer FDM Model Cartesian Berbasis Arduino,” JMPM (Jurnal Mater. dan Proses Manufaktur), vol. 7, no. 1, pp. 63–72, 2023, doi: 10.18196/jmpm.v7i1.16866.
M. Hikmat, S. Rostam, and Y. M. Ahmed, “Investigation of tensile property-based Taguchi method of PLA parts fabricated by FDM 3D printing technology,” Results Eng., vol. 11, p. 100264, 2021, doi: 10.1016/j.rineng.2021.100264.
H. Gonabadi, A. Yadav, and S. J. Bull, “The effect of processing parameters on the mechanical characteristics of PLA produced by a 3D FFF printer,” Int. J. Adv. Manuf. Technol., vol. 111, no. 3–4, pp. 695–709, 2020, doi: 10.1007/s00170-020-06138-4.
F. Yilan, İ. B. Şahin, F. Koç, and L. Urtekin, “The Effects of Different Process Parameters of PLA+ on Tensile Strengths in 3D Printer Produced by Fused Deposition Modeling,” El-Cezeri J. Sci. Eng., vol. 10, no. 1, pp. 160–173, 2023, doi: 10.31202/ecjse.1179492.
C. Abeykoon, P. Sri-Amphorn, and A. Fernando, “Optimization of fused deposition modeling parameters for improved PLA and ABS 3D printed structures,” Int. J. Light. Mater. Manuf., vol. 3, no. 3, pp. 284–297, 2020, doi: 10.1016/j.ijlmm.2020.03.003.
D. Villani, M. Savi, M. A. B. Andrade, L. L. Campos, and M. P. A. Potiens, “Characterization of ABS + W and ABS + Bi 3D printing filaments attenuation for different photon beams,” J. Phys. Conf. Ser., vol. 1826, no. 1, 2021, doi: 10.1088/1742-6596/1826/1/012037.
W. H. Pratama, H. -, and H. -, “Optimasi Parameter Proses 3D Printing Terhadap Kuat Tarik Material Filamen PLA + Menggunakan Metode Taguchi,” Sprocket J. Mech. Eng., vol. 3, no. 1, pp. 39–45, 2021, doi: 10.36655/sprocket.v3i1.568.
B. W. Karuniawan, F. Rachman, and M. T. Yoningtias, “Metode Taguchi Untuk Optimasi Parameter Mesin Printer 3D Terhadap Kwalitas Produk Material ABS,” Austenit, vol. 14, no. 2, pp. 61–68, 2022, doi: 10.53893/austenit.v14i2.4631.
E. I. Riza, C. Budiyantoro, and A. W. Nugroho, “Peningkatan Kekuatan Lentur Produk 3D Printing Berbahan Petg Dengan Optimasi Parameter Proses Menggunakan Metode Taguchi,” Media Mesin Maj. Tek. Mesin, vol. 21, no. 2, pp. 66–75, 2020, doi: 10.23917/mesin.v21i2.10856.
F. C. P. Sales, R. M. Ariati, V. T. Noronha, and J. E. Ribeiro, “Mechanical characterization of PDMS with different mixing ratios,” Procedia Struct. Integr., vol. 37, no. C, pp. 383–388, 2021, doi: 10.1016/j.prostr.2022.01.099.
D. Derlini and A. Jusuf Zulfikar, “Penyelidikan Kegagalan pada Alat Pemisah Karet Alam Jenis LRH 410,” IRA J. Tek. Mesin dan Apl., vol. 1, no. 3, pp. 51–61, 2023, doi: 10.56862/irajtma.v1i3.34.
Binyamin, A. S. Nurrokayati, Bagas Bayu Prasetyo, S. F. Rahman, and B. W. Febriantoko, “Rekayasa Pembuatan Kampas Rem Berbahan Dasar Serbuk Tempurung Kelapa Bermatriks Phenolic Resin Terhadap Performa Gesek Pengereman,” TRAKSI Maj. Ilm. Tek. Mesin, vol. 20, no. 1, pp. 45–58, 2020.
N. I. Gonçalves, F. Z. Pierre, A. L. S. Borges, J. M. F. Da Silva, and E. S. Uemura, “Analyzing SHORE A hardness to assess the durability of soft denture lining materials,” Brazilian Dent. Sci., vol. 26, no. 4, 2023, doi: 10.4322/bds.2023.e3986.
S. Ishikawa, Y. Yoshikawa, H. Kamata, U. Chung, and T. Sakai, “Injectable hydrogels with phase-separated structures that can encapsulate live cells,” pp. 1–28, 2022.
S. Agung and E. Prayogi, “Penggunaan Karbon Hitam terhadap Karakteristik Karet Nitril sebagai Karet Perapat Katup Tabung LPG,” Proceeding SENDIU, no. April, pp. 441–446, 2020.
C. W. Wullur and A. Andriyono, “Analisis Perbandingan Kekuatan Tarik Roller Chain (Suzuki Genuine Parts) Dan (Indoparts) Satria Fu 150,” Mustek Anim Ha, vol. 8, no. 2, pp. 132–140, 2019, doi: 10.35724/mustek.v8i2.2533.
R. S. Saputra, S. T. Hidayat, and T. Dwi, “Optimasi Uji Tegangan Tarik Pengelasan Tungsten Inert Gas pada Penggabungan Beda Material Baja Galvanish ( SGCC ) dengan Baja Karbon Rendah ( SPCC-SD ),” vol. 04, no. 01, pp. 36–47, 2024.
A. Allan, C. Kealley, A. Squelch, Y. H. Wong, C. H. Yeong, and Z. Sun, “Patient-specific 3D printed model of biliary ducts with congenital cyst,” Quant. Imaging Med. Surg., vol. 9, no. 1, pp. 86–93, 2019, doi: 10.21037/qims.2018.12.01.
D. F. Kruse and R. C. Edwards, “Automotive suspension bumpers - A correlation of parameters affecting impact response and a technique for achieving effective design,” SAE Tech. Pap., vol. 77, no. 1968, pp. 1868–1895, 1968, doi: 10.4271/680471.
DOI: http://dx.doi.org/10.32497/jrm.v19i3.5966
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Jurnal Rekayasa Mesin
_____________________________________________________________________
| Publisher: Mechanical Engineering Department, Politeknik Negeri Semarang (Semarang State Polytechnic) |
1.png){kind=logo}
_____________________________________________________________________
This work is licensed under a License Creative Commons Attribution-NonCommercial-ShareAlike 4.0 Internasional.