OTOMASI PENGERINGAN EMPON - EMPON MELALUI SISTEM KENDALI BERBASIS PLC DAN HMI DENGAN METODE PID DI KAMPUNG JAMU WONOLOPO SEMARANG

Adib Riski Fauzi, Fadhel Setiawan, Kevin Adita Putra Jaya, Dimas Wahyujati, Brigitta Pungki Yuliashari, Adi Wasono

Abstract


Abstrak
Industri jamu, sebagai bagian dari warisan budaya dan tradisi kesehatan masyarakat Indonesia, terus berkembang dengan memanfaatkan berbagai rempah seperti jahe, kencur, dan temulawak. Proses pengolahan rempah, terutama pengeringan, merupakan tahap kritis yang mempengaruhi kualitas dan daya simpan produk akhir. Di Kampung Jamu Wonolopo, Semarang, proses pengeringan masih dilakukan secara tradisional, yang rentan terhadap variasi cuaca. Penelitian ini bertujuan untuk merancang sistem kendali alat pengering empon- empon berbasis PLC dan HMI yang dapat meningkatkan efisiensi dan konsistensi proses pengeringan. Hasil penelitian menunjukkan bahwa integrasi PLC dan HMI memungkinkan otomatisasi dan kontrol yang stabil dengan metode PID, menghasilkan kadar air rata-rata 9% dalam waktu pengeringan sekitar 8 jam pada suhu 65°C, dengan konsumsi energi 9 kWh per siklus.
Kata Kunci: Jamu, Pengeringan, PLC, PID, Suhu

Abstract
The herbal medicine industry, as part of Indonesia's cultural heritage and traditional community health practices, continues to evolve by utilizing various spices such as ginger, aromatic ginger, and turmeric. The spice processing stage, particularly drying, is a critical phase that affects the quality and shelf life of the final product. In Wonolopo Herbal Village, Semarang, the drying process is still carried out traditionally, making it vulnerable to weather variations. This study aims to design a control system for a spice dryer using PLC and HMI to enhance the efficiency and consistency of the drying process. The results indicate that the integration of PLC and HMI enables automation and stable control through the PID method, achieving an average moisture content of 9% within approximately 8 hours of drying at 65°C, with an energy consumption of 9 kWh per cycle.
Keywords: Herbal Medicine, Drying, PLC, PID, Temperature

Keywords


Herbal Medicine, Drying, PLC, PID, Temperature

Full Text:

PDF

References


Anwar, S. (2021). Sistem Proteksi Tegangan Sentuh Pada Instalasi Listrik Berbasis Earth Leagage Circuit Breaker (Rcbo). AL ULUM: JURNAL SAINS DAN TEKNOLOGI, 6(2), Article 2.

Ayuningtyas, N. (2018). Sistem Monitoring Berat Pada Alat Pemilah Sampah Logam Dan Nonlogam Dengan Sensor Berat (Load Cell) Berbasis Programmable Logic Controller (Plc) [Other, undip]. https://doi.org/10/BAB_VI.pdf

Budiyanto, M., Setiyono, Y. W., & Effendi, A. (2022). Trainerprogrammable Logic Controller Dilengkapi Human Machine Interface (HMI) Guna Penguatan Praktek Otomasi Industri. Journal of Electrical Power Control and Automation (JEPCA), 5(2), Article 2. https://doi.org/10.33087/jepca.v5i2.81

Byantoro, S. M., Prabowo, D., & Jati, U. S. (2023). Tugas Akhir: Rancang Bangun Sistem Pengaduk Pada Homogenizing Emulsifier Machine Dalam Pembuatan Pupuk Organik Cair [Diploma, Politeknik Negeri Cilacap]. https://elib.pnc.ac.id/739/

Harahap, R., Armansyah, A., Sudaryanto, S., Pramudia, D. T., & Rian, A. F. (2022). Keselamatan Pemakaian Energi Listrik Rumah Tangga Yang Benar di Desa Bandar Rahmat Kecamatan Tanjung Tiram Kabupaten Batu Bara. JET (Journal of Electrical Technology), 7(1), Article 1.

Kartika, K., Asran, A., Erawati, H., Ezwarsyah, E., Putri, R., & Salahuddin, S. (2022). Pelatihan Platform Arduino Bagi Siswa SMA Negeri 1 Baktiya Alue Ie Puteh Aceh Utara. Jurnal Solusi Masyarakat Dikara, 2(1), Article 1.

Putera, A. S. (2017). Simulator Sistem Otomatisasi Dengan Solid State Relay Untuk Pertukaran Sumber Energi Listrik Antara Pln Dan Genset [Thesis, Universitas Medan Area]. https://repositori.uma.ac.id/handle/12 3456789/17784

Risfendra, & Setyawan, H. (2020). Otomasi Industri Dengan Arduino Outseal PLC. UNP PRESS.

Rombekila, A., & Entamoing, B. L. (2022). Prototype Sistem Smart Sistem Smart Home Berbasis IoT dengan Handphone Android Menggunakan NODEMCU ESP32. Jurnal Teknik AMATA, 3(1), Article 1. https://doi.org/10.55334/jtam.v3i1.27 5

Sabtiawan, A. A., & Much Djunaidi, S. T. (2023). Analisis Pengembangan Usaha Bisnis Jamu Tradisional Menggunakan Analisis SWOT Dan QSPM (Studi Kasus: UMKM Produsen Jamu Suti Sehati) [S1, Universitas Muhammadiyah Surakarta]. https://eprints.ums.ac.id/111330/

Sahli, I., Kristanto, I., & Thali, T. C. (2001). Perancangan RS 232 to RS 485 Converter Sistem Network Multidrop. Jurnal Teknik Elektro, 1(1). https://doi.org/10.9744/jte.1.1

Saputra, O. (t.t.). Komunikasi Outseal PLC dengan Smartphone | Ranah Research: Jurnal Penelitian dan Pengembangan Multidisiplin. Diambil 9 Juli 2024, dari https://jurnal.ranahresearch.com/inde x.php/R2J/article/view/539

Subagio, D., Putri, D. K., & Ardi, S. (2017). RANCANG BANGUN PLC TRAINING KIT DIVISI SERVICE PARTS DAN WELDING PRODUKSI BERBASIS PLC OMRON CJ2M-CPU11 | Teknologi. https://technologic.polytechnic.astra.ac.id/index.php/firstjournal/article/view/192

Sufandi, M. R., Kevin, V. L., Hadikusuma, M. I., & Bakar, A. (2023). Purwarupa Proses Pemantauan dan Pengisian Botol Kemasan Berbasis Modul PLC Outseal Dan HMI Haiwell. Jurnal ELIT, 4(2), Article 2. https://doi.org/10.31573/elit.v4i2.579

Sunar, S., & Subagiyo, S. (2020). Peningkatan Keaktifan dan Ketrampilan Membuat PCB Kelas XII TAV SMK Negeri 1 Semarang. Edu Elektrika Journal, 9(2), Article 2. https://doi.org/10.15294/eej.v9i2.37973




DOI: http://dx.doi.org/10.32497/orbith.v20i3.6245

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License. View My Stats