About the Journal

Journal of Mechanical Engineering and Applied Technology (e-ISSN : 3025-2725) is a peer-reviewed journal that publishes scientific articles from mechanical engineering and applied technology disciplines.  Journal of Mechanical Engineering and Applied Technology (JMEAT)  which is published by the Mechanical Engineering Department,  Politeknik Negeri Semarang.  The frequency of publication is 3 times a year (March,  July, and  November). This journal receives manuscripts or articles in engineering and applied technology from various academics and researchers both nationally and internationally.

Articles published in  JMEAT  are articles that have been reviewed by Peer-Reviewers. The decision on the acceptance of a scientific article in this journal shall be the right of the Board of Editors, based on recommendations from Peer-Reviewers.

The author guidelines can be downloaded below

1. Register & Submission [Link]

2. Template  [Link]

 

Current Issue

Vol. 3 No. 2 (2025): VOLUME 3 ISSUE 2 YEAR 2025 (JULY 2025)
View Vol. 3 No. 2 (2025): VOLUME 3 ISSUE 2 YEAR 2025 (JULY 2025)
Published: 2025-07-31

Front Matter

  • Front Matter Journal of Mechanical Engineering and Applied Technology, 3 (2) July 2025

    DOI: https://doi.org/10.32497/jmeat.v3i2.6560

Articles

  • OPTIMASI DIAMETER LAS TITIK MENGGUNAKAN METODE TAGUCHI PADA PROSES RESISTANCE SPOT WELDING ROBOTIK DI MESIN OTC DAIHEN

    Komar Roni, Imaduddien Ariefa, Rieky Handoko, Anton Harseno, Muhammad Nanang Adi Saputra, Sahal Ahmad Albab
    37-44
    DOI: https://doi.org/10.32497/jmeat.v3i2.6735

  • ANALISA KEBOCORAN FUEL SUPPLY PUMP PADA UNIT EXCAVATOR PC 135F-10M0 DI PT XYZ

    Aryati Muhaymin Marali, Muhamad Muhaimin, Arwin Arwin, Herdia Dwimas, Yasmin Zulfati Yusrina, Muhammad Showi Nailul Ulum
    45-52
    DOI: https://doi.org/10.32497/jmeat.v3i2.6662

  • ERGONOMIC POSTURE CLASSIFICATION OF BENCH WORK UTILIZING MUSCLE DATA: A CASE STUDY IN EDUCATIONAL WORKSHOP

    Farika Tono Putri, Wiwik Purwati, Margana, Supriyo, Hartanto Prawibowo, Elta Diah Pasmanasari, Rifky Ismail, Fadhil Muhammad Kadavi, Muryanto
    53-60
    DOI: https://doi.org/10.32497/jmeat.v3i2.6674

  • ANALISIS TEGANGAN DAN DISTRIBUSI BEBAN INTERFERANCE SCREW (IFS) DENGAN MATERIAL TITANIUM ALLOY

    Yusuf Subagyo; Baharudin Priwintoko, Ibnu Rosyid Al Hassany, Arif Syamsudin
    61-66
    DOI: https://doi.org/10.32497/jmeat.v3i2.6718

  • ANALISIS KINERJA MESIN LASER CUTTING TRULASER 1030 PADA PRODUKSI KENDARAAN KHUSUS MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE)

    Fariz Wisda Nugraha, Sendie Yuliarto Margen, Rifky Ismail, Muhammad Farel, Yusuf Subagyo, Hartanto Prawibowo, Rizal Mustofa
    67-74
    DOI: https://doi.org/10.32497/jmeat.v3i2.6761

  • STRUCTURAL INTEGRITY ASSESSMENT OF LPG-FIRED CABINET DRYER USING FINITE ELEMENT ANALYSIS (FEA)

    Nafisah Amalia, Yusi Amalia Renaningtyas, Nanang Apriandi MS, Yusuf Dewantoro Herlambang, Avicenna An-Nizhami, Padang Yanuar, Aris Fiatno
    75-84
    DOI: https://doi.org/10.32497/jmeat.v3i2.6635

  • ANALISIS DAMPAK IMPLEMENTASI MESIN FIRMWARE UPLOADING DENGAN KAPASITAS 60 INTEGRATED CIRCUIT PERMENIT PADA PERUSAHAAN IC CARD

    Fathur Rachman, Timotius Anggit Kristiawan, Farika Tono Putri
    85-94
    DOI: https://doi.org/10.32497/jmeat.v3i2.6637

Back Matter

  • Back Matter Journal of Mechanical Engineering and Applied Technology, 3 (2) July 2025

    DOI: https://doi.org/10.32497/jmeat.v3i2.6561
View All Issues

Journal of Mechanical Engineering and Applied Technology has been indexed by :