Model Regresi Kuadratik pada Pengepresan Biji Kemiri
DOI:
https://doi.org/10.32497/jmeat.v4i2.7642Keywords:
candlenut seed, candlenut oil, extraction machine, quadratic regressionAbstract
Vegetable oil (seeds oil) is produced from seeds. To obtain vegetable oil, a seed extraction machine is required. Seed pressing machines have specifications based on their extraction method. In this study, candlenut seed oil was produced using an extraction machine using the extrusion method. This process uses a combination of heating, friction, and high pressure. A quadratic regression model was used to predict the effect of temperature on the volume of oil produced. The results showed that the optimal temperature for producing candlenut oil is 95.96 degrees Celsius.
References
K. Alabi, R. Busari, and O. Joel, "Development and Performance Evaluation of a Variable-Pitch Tapered-Shaft Screw Press for Palm Oil Extraction," Gazi University Journal of Science Part A: Engineering and Innovation, vol. 9, no. 2, pp. 49–61, 2022, doi: 10.54287/gujsa.1069996.
A. Allay, A. Ben Moumen, Y. Rbah, M.-L. Fauconnier, J. Nkengurutse, H. S. Caid, A. Elamrani, and F. Mansouri, "Effect of Screw Pressing Temperature on Yield, Bioactive Compounds, and Quality of Hemp (Cannabis sativa L.) Seed Oil," Journal of Cannabis Research, vol. 7, Art. no. 37, 2025, doi: 10.1186/s42238-025-00296-6.
B. Ali, M. B. Khan, and M. Taqi, "Design and Development of an Efficient Screw Press Expeller for Oil Expression from Jatropha curcas Seeds: A Computational Fluid Dynamics Study of Expeller for Performance Analysis," Industrial & Engineering Chemistry Research, vol. 52, 2013.
A. Chapuis, J. Blin, P. Carré, and D. Lecomte, "Separation Efficiency and Energy Consumption of Oil Expression Using a Screw Press: The Case of Jatropha curcas L. Seeds," Industrial Crops and Products, vol. 52, pp. 752–761, 2014.
S. M. M. Habib, M. A. El-Sharabasy, M. M. Badr, and M. El-Kholy, "Construction and Performance Evaluation of a Screw Press Machine to Extract Jatropha Oil," Journal of Agricultural Research, vol. 46, pp. 1479–1488, 2019.
M. Hayat et al., "Uji Kekuatan Puntir Material Baja ST60 dengan Perlakuan Panas dan Tanpa Perlakuan Panas," 2014. [Online]. Available: https://adoc.pub/uji-kekuatan-puntir-material-baja-st-60-dengan-perlakuan-pan.html
Chynintya Galuh RP and V. Paramita, "Pengaruh Temperatur, Kecepatan Putar Ulir, dan Waktu Pemanasan Awal terhadap Perolehan Minyak Kemiri dari Biji Kemiri dengan Metode Penekanan Mekanis (Screw Press)," Metana, vol. 12, no. 1, pp. 17–25, 2016.
S. S. Guede, Y. R. Soro, K. Kouame, and Brou, "Optimization of Screw Press Extraction of Citrullus lanatus Seed Oil and Physicochemical Characterization," European-American Journals, vol. 4, pp. 35–46, 2017.
A. N. Siregar et al., "Comparison of Oil Press for Jatropha Oil: A Review," Research in Agricultural Engineering, vol. 61, pp. 11–13, 2015.
Sularso and K. Suga, “Dasar Perencanaan dan Pemilihan Elemen Mesin”. Jakarta: Pradnya Paramita, 1997.
C. X. Tan, S. T. Tan, and S. S. Tan, "An Overview of Papaya Seed Oil Extraction Method," International Journal of Food Science and Technology, vol. 55, pp. 1506–1514, 2020.
G. F. Utami, D. Suhedi, and E. Kurniati, "Perbandingan Metode Regresi Linier dan Non-Linier Kuadratik pada Peramalan Penjualan Air Minum," JMTM: Jurnal Matematika Teori dan Terapan Matematika, vol. 20, pp. 33–41, 2021.
C. Van, “Alat-alat Perkakas”. Bandung: Binacipta, 1986.
R. L. Mott, “Machine Elements in Mechanical Design”, 4th ed. Upper Saddle River, NJ, USA: Pearson Education, 2004.
E. Shigley and C. R. Mischke, Mechanical Engineering Design, 3rd ed. New York, NY, USA: McGraw-Hill, 1976.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Dita Anies Munawwaroh, Abdul Syukur Alfauzi [ME], Adhy Purnomo [ME], Ali Sai’in [ME], Elfrida Rizky Riadini [ME]
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright of articles that appear in Journal of Mechanical Engineering and Applied Technology belongs exclusively to Penerbit Jurusan Teknik Mesin Politeknik Negeri Semarang. This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
