Rancang Bangun dan Analisis Otomatisasi Alat Pengisian dan Pemadatan Media Tanam Jamur Kapasitas 171 Baglog/Jam dengan Sistem Pneumatik
DOI:
https://doi.org/10.32497/jmeat.v1i1.4772Abstract
Mushroom growing media filler and compactor machine is a machine to print baglog as mushroom growing media. The problems that faced by mushrooms farmer is low productivity, with this tool farmers can increase the productivity of mushroom filling and compaction baglog because the filling and compacting process use a pneumatic system.The method to manufacture mushroom growing media filler and compactor machine are the initial observations of the Small and Medium Enterprises (UKM). The development of electoral observation is form alternative designs, design, manufacturing, assembly until the testing process and data retrieval. The results of design automation of filling and compaction of the mushroom growing media using pneumatic system has a production capacity of 171baglog/hour by using a working pressure of 6 bar.
References
E. Mikrianto, R. Yunus, and T. Rohman, “Pembibitan Jamur Tiram UKM Jamur Di Desa Karang Indah Kabupaten Barito Kuala Kalimantan Selatan,” J. Pengabdi. ILUNG (Inovasi Lahan Basah Unggul), vol. 2, no. 3, p. 515, 2023, doi: 10.20527/ilung.v2i3.6631.
L. Lianah, A. Umriana, and F. Aziz, “Peningkatan Ekonomi Masyarakat Sriging Patemon Gunungpati Semarang Melalui Budidaya Jamur Tiram,” ”¦ Agama untuk Pemberdaya., vol. 13, no. 2, pp. 405”“422, 2013, [Online]. Available: https://www.journal.walisongo.ac.id/index.php/dimas/article/view/62
P. Sheng, W. Li, P. Du, K. Cao, and Q. Cai, “Multi-functional CuO nanowire/TiO2nanotube arrays photoelectrode synthesis, characterization, photocatalysis and SERS applications,” Talanta, vol. 160, pp. 537”“546, 2016, doi: 10.1016/j.talanta.2016.07.043.
A. Gomes de Freitas et al., “Experimental design and optimization of a novel solids feeder device in energy efficient pneumatic conveying systems,” Energy Reports, vol. 9, no. February, pp. 387”“400, 2023, doi: 10.1016/j.egyr.2023.05.270.
V. Siva Bathula, V. Mendi, S. Chinthamreddy, A. Pavan Kumar, and B. Chandra Bose, “Pick and place operation by collaborating electromagnetic and pneumatic gripper robots,” Mater. Today Proc., no. xxxx, 2023, doi: 10.1016/j.matpr.2023.06.192.
Y. Deng, Z. Wang, H. Shen, J. Gong, and Z. Xiao, “A comprehensive review on non-pneumatic tyre research,” Mater. Des., vol. 227, p. 111742, 2023, doi: 10.1016/j.matdes.2023.111742.
R. S. Khurmi and J. K. Gupta, “A Textbook Of Machine Design (S.I. Units), Ram Nagar, New Delhi, Eurasia Publishing House (PVT.) LTD.,” Mach. Des., vol. 1, no. I, p. 200, 2011, [Online]. Available: https://docs.google.com/file/d/0B7OQo6ncgyFjbW53VEJEclZuSzQ/edit
and H. G. L. Hall, A. S., “Theory and problems of machine design,” SI (Metric) Edition. Schaum”™s Outline Series, McGraw Hill Book Company, New York. pp. 113-130., 1980.
I. Iswanto, E. Widodo, A. Akbar, and A. K. Putra, “Perbandingan Induction Hardening dengan Flame Hardening
Downloads
Published
Issue
Section
License
Authors who publish articles in this journal agree to the following terms:
The author owns the copyright and grants first publication rights to the Journal with work simultaneously licensed under a Creative Commons Attribution License which allows others to share the work with the work acknowledged and first published in this journal
Authors may enter into separate, additional contractual agreements for the non-exclusive distribution of the journal's published version of the work (for example, posting it to an institutional repository or publishing it in a book), with an acknowledgment of the first publication in this journal.
Authors are permitted and encouraged to upload their work online (for example, in an institutional repository or on an author's website) before and during the submission process, as this can lead to productive exchanges, as well as earlier citations and a larger number of citations of the published work. (See the impact of open Access).
