Rancang Bangun dan Analisis Screen Cutting Machine Guna Meningkatkan Produktivitas Pemotongan

Authors

  • Timotius Anggit Kristiawan Politeknik Negeri Semarang
  • Alfiando Satrio Wibowo Politeknik Negeri Semarang
  • Arif Hidayat Politeknik LPP Yogyakarta

DOI:

https://doi.org/10.32497/jmeat.v1i1.4720

Keywords:

Quality, NG, Screen Cutting

Abstract

The material cutting process can be done with a variety of mechanical power options that can be used, ranging from manual cutting methods that require manual skills, to semi-automatic and automatic cutting that utilize advanced technology to increase efficiency and accuracy. The process of cutting materials at PT Suri Tani Pemuka is still done manually, by relying on the skills of the workers' hands. The impact resulting from the manual cutting process is that the cutting results are not according to the standard size determined by the company, so that there are still many NG products found from the cutting process. Based on these problems, it is necessary to have a solution, namely by designing a screen cutting machine to increase cutting productivity. The methods used in this research include Identification of need, Definition of problem, Synthesis, Analysis and Optimization, Evaluation, and Presentation. The test was carried out to test the quality of the screen cut results. The results obtained from this study are screen cutting machines for cutting screen equipment with an increase in the percentage of successful screen cutting by 33.3% from 50% to 83.3%.

References

Alfaizt, A., Nauval, M. A., Fitriati, A., & Ishak, I. (2021). Rancang Bangun Mesin Pemotong Pelat Menggunakan Mikrokontroller ATmega328 Dengan Pengontrolan GRBL. Mechatronics Journal in Professional and Entrepreneur (MAPLE), 3(1), 9-17.

Riyadi, E. S., & Kusumawati, E. (2022). Rancang Bangun Sliding Cutting Jig Guna Mengoptimalkan Fungsi Kerja Mesin Gerinda Tangan Sebagai Alat Potong Plat Lembaran. Jurnal Pengelolaan Laboratorium Pendidikan, 4(2), 82-89.

Natasha, N.A., 2017, Perancangan dan Pengujian Alat Bantu Pegang (Fixture) untuk Proses Pemotongan Plat Mesin Threser (Doctoral dissertation, Universitas Andalas).

Kristiawan, T. A., Abidin, Z., Laksono, P. S., & Nugroho, W. I. (2021). Rancang Bangun Mesin Pemasang Snap Ring untuk Mengurangi Cycle Time pada Assembling Transmission FF di PT. AWI. Jurnal Rekayasa Mesin, 16(1), 39-47.

Wits, W. W., Carmignato, S., Zanini, F., & Vaneker, T. H. (2016). Porosity testing methods for the quality assessment of selective laser melted parts. CIRP annals, 65(1), 201-204.

Downloads

Published

2023-03-31

Issue

Vol. 1 No. 1 (2023): Volume 1 Issue 1 Year 2023 (March 2023)

Section

Articles

License

Authors who publish articles in this journal agree to the following terms:

The author owns the copyright and grants first publication rights to the Journal with work simultaneously licensed under a Creative Commons Attribution License which allows others to share the work with the work acknowledged and first published in this journal

Authors may enter into separate, additional contractual agreements for the non-exclusive distribution of the journal's published version of the work (for example, posting it to an institutional repository or publishing it in a book), with an acknowledgment of the first publication in this journal.

Authors are permitted and encouraged to upload their work online (for example, in an institutional repository or on an author's website) before and during the submission process, as this can lead to productive exchanges, as well as earlier citations and a larger number of citations of the published work. (See the impact of open Access).