The Characterization Methods of Natural Fibers (Cellulose Fibers) as Reinforcement for Polymer Matrix Composites: A Review

Natural Fibers Characterization

Authors

  • Yoan Perima universitas riau
  • Rahmat Iman Mainil

DOI:

https://doi.org/10.32497/jrm.v20i2.6663

Keywords:

Cellulose, Characterization, Composite, Natural fiber, Polymer

Abstract

The interest in using natural fibers as reinforcement in polymer matrix composites is increasing, driven by their abundant availability, biodegradability, and significantly lower production costs compared to synthetic fibers. The cellulose content in natural fibers has a significant impact on the mechanical properties and thermal stability of the fibers, ultimately affecting the mechanical strength of the composites. To enhance the cellulose content in the fibers, one approach is to use alkali treatment with a NaOH solution on the fibers. To evaluate the effectiveness of the chemical treatment and study the physical and mechanical characteristics of the fibers, as well as to assess the potential and feasibility of the fibers as reinforcement in polymer matrix composites, a series of characterizations or tests on the fibers needs to be conducted. This review article will discuss in depth the methods of characterizing natural fibers and the influence of their physical and mechanical properties on composite strength. This article is expected to provide a positive contribution to the development of polymer matrix composite materials reinforced with natural fibers.

References

[1] Khalid MY, Al Rashid A, Arif ZU, Ahmed W, Arshad H, Zaidi AA. Natural fiber reinforced composites: Sustainable materials for emerging applications. Results in Engineering 2021;11. https://doi.org/10.1016/j.rineng.2021.100263.

[2] Puttegowda M. Eco-friendly composites: exploring the potential of natural fiber reinforcement. Discover Applied Sciences 2025;7:401. https://doi.org/10.1007/s42452-025-06981-8.

[3] Rajendran S, Palani G, Trilaksana H, Marimuthu U, Kannan G, Yang Y-L, et al. Advancements in natural fibre based polymeric composites: A comprehensive review on mechanical-thermal performance and sustainability aspects. Sustainable Materials and Technologies 2025;44:e01345. https://doi.org/10.1016/j.susmat.2025.e01345.

[4] Elfaleh I, Abbassi F, Habibi M, Ahmad F, Guedri M, Nasri M, et al. A comprehensive review of natural fibers and their composites: An eco-friendly alternative to conventional materials. Results in Engineering 2023;19. https://doi.org/10.1016/j.rineng.2023.101271.

[5] Venkatarajan S, Subbu C, Athijayamani A, Muthuraja R. Mechanical properties of natural cellulose fibers reinforced polymer composites – 2015–2020: A review. Mater Today Proc 2021;47:1017–24. https://doi.org/10.1016/j.matpr.2021.05.547.

[6] Verma D, Goh KL. Effect of Mercerization/Alkali Surface Treatment of Natural Fibres and Their Utilization in Polymer Composites: Mechanical and Morphological Studies. Journal of Composites Science 2021;5:175. https://doi.org/10.3390/jcs5070175.

[7] Patel RV, Yadav A, Winczek J. Physical, Mechanical, and Thermal Properties of Natural Fiber-Reinforced Epoxy Composites for Construction and Automotive Applications. Applied Sciences 2023;13:5126. https://doi.org/10.3390/app13085126.

[8] Patel RV, Yadav A, Winczek J. Physical, Mechanical, and Thermal Properties of Natural Fiber-Reinforced Epoxy Composites for Construction and Automotive Applications. Applied Sciences 2023;13:5126. https://doi.org/10.3390/app13085126.

[9] Raja T. Characterization of a novel natural fiber extracted from Albizia julibrissin plant stem: Advancing sustainable product development. Results in Engineering 2025;25:103737. https://doi.org/10.1016/j.rineng.2024.103737.

[10] Rai PS, Unnikrishnan S, Chandrashekar A. Influence of alkali treatment on physiochemical and morphological properties of palmyra fibers. Ind Crops Prod 2025;224:120298. https://doi.org/10.1016/j.indcrop.2024.120298.

[11] Gapsari F, Purnowidodo A, Hidayatullah S, Suteja S. Characterization of Timoho Fiber as a reinforcement in green composite. Journal of Materials Research and Technology 2021;13:1305–15. https://doi.org/10.1016/j.jmrt.2021.05.049.

[12] Widodo E, Pratikto, Sugiarto, Widodo TD. Comprehensive investigation of raw and NaOH alkalized sansevieria fiber for enhancing composite reinforcement. Case Studies in Chemical and Environmental Engineering 2024;9:100546. https://doi.org/10.1016/j.cscee.2023.100546.

[13] Bekele AE, Lemu HG, Jiru MG. Study of the Effects of Alkali Treatment and Fiber Orientation on Mechanical Properties of Enset/Sisal Polymer Hybrid Composite. Journal of Composites Science 2023;7:37. https://doi.org/10.3390/jcs7010037.

[14] Baskaran PG, Kathiresan M, Pandiarajan P. Effect of Alkali-treatment on Structural, Thermal, Tensile Properties of Dichrostachys Cinerea Bark Fiber and Its Composites. Journal of Natural Fibers 2022;19:433–49. https://doi.org/10.1080/15440478.2020.1745123.

[15] Shahril SM, Ridzuan MJM, Majid MSA, Bariah AMN, Rahman MTA, Narayanasamy P. Alkali treatment influence on cellulosic fiber from Furcraea foetida leaves as potential reinforcement of polymeric composites. Journal of Materials Research and Technology 2022;19:2567–83. https://doi.org/10.1016/j.jmrt.2022.06.002.

[16] Thandavamoorthy R, Devarajan Y, Thanappan S. Analysis of the characterization of NaOH-treated natural cellulose fibre extracted from banyan aerial roots. Sci Rep 2023;13:12579. https://doi.org/10.1038/s41598-023-39229-9.

[17] Tengsuthiwat J, A V, R V, G YGT, Rangappa SM, Siengchin S. Characterization of novel natural cellulose fiber from Ficus macrocarpa bark for lightweight structural composite application and its effect on chemical treatment. Heliyon 2024;10. https://doi.org/10.1016/j.heliyon.2024.e30442.

[18] Rafiqah SA, Abdullah N, Abdan K, Roslim MHM, Radzuan MN. Influence of Alkali Treatment on Mechanical, Physical, Thermal and Morphological Properties of Kenaf Fiber/Polyamide 6 Composites. Journal of Natural Fibers 2025;22. https://doi.org/10.1080/15440478.2025.2515468.

[19] Jaiswal D, Devnani GL, Rajeshkumar G, Sanjay MR, Siengchin S. Review on extraction, characterization, surface treatment and thermal degradation analysis of new cellulosic fibers as sustainable reinforcement in polymer composites. Current Research in Green and Sustainable Chemistry 2022;5:100271. https://doi.org/10.1016/j.crgsc.2022.100271.

[20] Kouidri D, Rokbi M, Rahmouni ZE, Kherbiche Y, Bouchareb S, Mavinkere Rangappa S, et al. Investigation of mechanical and physico-chemical properties of new natural fiber extracted from Bassia indica plant for reinforcement of lightweight bio-composites. Heliyon 2024;10:e35552. https://doi.org/10.1016/j.heliyon.2024.e35552.

[21] Hozman-Manrique AS, Garcia-Brand AJ, Hernández-Carrión M, Porras A. Isolation and Characterization of Cellulose Microfibers from Colombian Cocoa Pod Husk via Chemical Treatment with Pressure Effects. Polymers (Basel) 2023;15:664. https://doi.org/10.3390/polym15030664.

[22] Mohamad NAN, Jai J. Response surface methodology for optimization of cellulose extraction from banana stem using NaOH-EDTA for pulp and papermaking. Heliyon 2022;8:e09114. https://doi.org/10.1016/j.heliyon.2022.e09114.

[23] Wendimu MY, Hooks SB. Microglia Phenotypes in Aging and Neurodegenerative Diseases. Cells 2022;11:2091. https://doi.org/10.3390/cells11132091.

[24] Thi Thuy Van N, Gaspillo P, Thanh HGT, Nhi NHT, Long HN, Tri N, et al. Cellulose from the banana stem: optimization of extraction by response surface methodology (RSM) and charaterization. Heliyon 2022;8:e11845. https://doi.org/10.1016/j.heliyon.2022.e11845.

[25] Ferdous T, Ni Y, Quaiyyum MA, Uddin MN, Jahan MS. Non-Wood Fibers: Relationships of Fiber Properties with Pulp Properties. ACS Omega 2021;6:21613–22. https://doi.org/10.1021/acsomega.1c02933.

[26] Karimah A, Ridho MR, Munawar SS, Adi DS, Ismadi, Damayanti R, et al. A review on natural fibers for development of eco-friendly bio-composite: characteristics, and utilizations. Journal of Materials Research and Technology 2021;13:2442–58. https://doi.org/10.1016/j.jmrt.2021.06.014.

[27] S R, B H MP, Gomathi P, Swamy GM, Kandagal ZB, Anne G. Influence of fibre direction on the mechanical properties and artificial intelligence-based performance prediction of hybrid abaca-jute amino composites. Mater Res Express 2024;11:075302. https://doi.org/10.1088/2053-1591/ad5f7e.

[28] Bozaci E, Altınışık Tağaç A. Extraction and Characterization of New Cellulosic Fiber from Catalpa bignonioides Fruits for Potential Use in Sustainable Products. Polymers (Basel) 2022;15:201. https://doi.org/10.3390/polym15010201.

[29] Bozaci E, Altınışık Tağaç A. Extraction and Characterization of New Cellulosic Fiber from Catalpa bignonioides Fruits for Potential Use in Sustainable Products. Polymers (Basel) 2022;15:201. https://doi.org/10.3390/polym15010201.

[30] Bozaci E, Altınışık Tağaç A. Extraction and Characterization of New Cellulosic Fiber from Catalpa bignonioides Fruits for Potential Use in Sustainable Products. Polymers (Basel) 2022;15:201. https://doi.org/10.3390/polym15010201.

[31] Obame SV, Betené ADO, Naoh PM, Betené FE, Atangana A. Characterization of the Neuropeltis acuminatas liana fiber treated as composite reinforcement. Results in Materials 2022;16. https://doi.org/10.1016/j.rinma.2022.100327.

[32] Musthaq MAhmed, Dhakal HN, Zhang Z, Barouni A, Zahari R. The Effect of Various Environmental Conditions on the Impact Damage Behaviour of Natural-Fibre-Reinforced Composites (NFRCs)—A Critical Review. Polymers (Basel) 2023;15:1229. https://doi.org/10.3390/polym15051229.

[33] Sadeghi P, Cao Q, Abouzeid R, Shayan M, Koo M, Wu Q. Experimental and Statistical Investigations for Tensile Properties of Hemp Fibers. Fibers 2024;12:94. https://doi.org/10.3390/fib12110094.

[34] Espinach FX, Julian F, Alcalà M, Vilaseca F, Carrasco F, Mutjé P. Effective Tensile Strength Estimation of Natural Fibers through Micromechanical Models: The Case of Henequen Fiber Reinforced-PP Composites. Polymers (Basel) 2022;14:4890. https://doi.org/10.3390/polym14224890.

[35] Sriseubsai W, Praemettha A. Hybrid Natural Fiber Composites of Polylactic Acid Reinforced with Sisal and Coir Fibers. Polymers (Basel) 2024;17:64. https://doi.org/10.3390/polym17010064.

[36] Soatthiyanon N, Crosky A, Heitzmann MT. Comparison of Experimental and Calculated Tensile Properties of Flax Fibres. Journal of Composites Science 2022;6:100. https://doi.org/10.3390/jcs6040100.

[37] Islam F, Joannès S, Laiarinandrasana L. Evaluation of Critical Parameters in Tensile Strength Measurement of Single Fibres. Journal of Composites Science 2019;3:69. https://doi.org/10.3390/jcs3030069.

[38] Engelbrecht-Wiggans AE, Forster AL. Analysis of strain correction procedures for single fiber tensile testing. Compos Part A Appl Sci Manuf 2023;167:107411. https://doi.org/10.1016/j.compositesa.2022.107411.

[39] Ramesh M, Tamil Selvan M, Sreenivas P, Sahayaraj AF. Advanced machine learning-driven characterization of new natural cellulosic Lablab purpureus fibers through PCA and K-means clustering techniques. Int J Biol Macromol 2025;306:141589. https://doi.org/10.1016/j.ijbiomac.2025.141589.

[40] Thimmegowda DY, Hindi J, Markunti GB, Kakunje M. Enhancement of Mechanical Properties of Natural Fiber Reinforced Polymer Composites Using Different Approaches—A Review. Journal of Composites Science 2025;9:220. https://doi.org/10.3390/jcs9050220.

[41] Ahmad AF, Aziz SA, Yaakob Y, Abd Ali A, Issa NA. Preparation and Characterization of Semi-Flexible Substrates from Natural Fiber/Nickel Oxide/Polycaprolactone Composite for Microstrip Patch Antenna Circuitries for Microwave Applications. Polymers (Basel) 2020;12:2400. https://doi.org/10.3390/polym12102400.

[42] Avram SE, Tudoran LB, Cuc S, Borodi G, Birle BV, Petean I. Natural Fiber Reinforcement of Ceramic Slurry Compacts. Journal of Composites Science 2024;8:542. https://doi.org/10.3390/jcs8120542.

[43] Cunha J dos SC da, Nascimento LFC, Luz FS da, Garcia Filho F da C, Oliveira MS, Monteiro SN. Titica Vine Fiber (Heteropsis flexuosa): A Hidden Amazon Fiber with Potential Applications as Reinforcement in Polymer Matrix Composites. Journal of Composites Science 2022;6:251. https://doi.org/10.3390/jcs6090251.

[44] Kar A, Saikia D. Characterization of new natural cellulosic fiber from Calamus tenuis (Jati Bet) cane as a potential reinforcement for polymer composites. Heliyon 2023;9:e16491. https://doi.org/10.1016/j.heliyon.2023.e16491.

[45] El Oudiani A, Msahli S, Sakli F. In-depth study of agave fiber structure using Fourier transform infrared spectroscopy. Carbohydr Polym 2017;164:242–8. https://doi.org/10.1016/j.carbpol.2017.01.091.

[46] Shahinur S, Sayeed MMA, Hasan M, Sayem ASM, Haider J, Ura S. Current Development and Future Perspective on Natural Jute Fibers and Their Biocomposites. Polymers (Basel) 2022;14:1445. https://doi.org/10.3390/polym14071445.

[47] Pasieczna-Patkowska S, Cichy M, Flieger J. Application of Fourier Transform Infrared (FTIR) Spectroscopy in Characterization of Green Synthesized Nanoparticles. Molecules 2025;30:684. https://doi.org/10.3390/molecules30030684.

[48] Santos AGA, Nascimento D da CB, Lopes FPD, Simonassi NT, Monteiro SN, Silva ACR da, et al. Investigation of the Flexural and Charpy Impact Properties of Polymer Composites Reinforced with Tururi (Manicaria saccifera) Fibrous Fabric. Polymers (Basel) 2025;17:466. https://doi.org/10.3390/polym17040466.

[49] Hasan KMF, Hasan KN Al, Ahmed T, György S-T, Pervez MN, Bejó L, et al. Sustainable bamboo fiber reinforced polymeric composites for structural applications: A mini review of recent advances and future prospects. Case Studies in Chemical and Environmental Engineering 2023;8:100362. https://doi.org/10.1016/j.cscee.2023.100362.

[50] Xu F, Shang J, Abdurexit A, Jamal R, Abdiryim T, Li Z, et al. Effect of Chemical Treatment of Cotton Stalk Fibers on the Mechanical and Thermal Properties of PLA/PP Blended Composites. Polymers (Basel) 2024;16:1641. https://doi.org/10.3390/polym16121641.

[51] Senthamaraikannan P, Sahayaraj AF, Selvan MT, Suyambulingam I, Priyadharshini GS, Durai PN, et al. Isolation and Analysis of Cellulosic Fiber Derived from Anisomeles malabaricus Stems. Journal of Natural Fibers 2025;22. https://doi.org/10.1080/15440478.2025.2502055.

[52] Ahmed J, Varshney SK. Polylactides—Chemistry, Properties and Green Packaging Technology: A Review. Int J Food Prop 2011;14:37–58. https://doi.org/10.1080/10942910903125284.

[53] Kumar R, Ganguly A, Purohit R. Thermogravimetric analysis of natural fiber reinforced hybrid composites – A review. Mater Today Proc 2023. https://doi.org/10.1016/j.matpr.2023.08.025.

[54] Nurazzi NM, Asyraf MRM, Rayung M, Norrrahim MNF, Shazleen SS, Rani MSA, et al. Thermogravimetric Analysis Properties of Cellulosic Natural Fiber Polymer Composites: A Review on Influence of Chemical Treatments. Polymers (Basel) 2021;13:2710. https://doi.org/10.3390/polym13162710.

[55] Shenoy Heckadka S, Pai Ballambat R, Bhagavath P, Kini MV, Sinha RK, Sonali MK, et al. Thermogravimetric analysis of flax, jute, and UHMWPE fibers and their composites with melamine and phenol formaldehyde resins. Cogent Eng 2023;10. https://doi.org/10.1080/23311916.2023.2209990.

[56] Neto JSS, de Queiroz HFM, Aguiar RAA, Banea MD. A Review on the Thermal Characterisation of Natural and Hybrid Fiber Composites. Polymers (Basel) 2021;13:4425. https://doi.org/10.3390/polym13244425.

[57] Protim Mudoi M, Sinha S. Thermal degradation study of natural fibre through thermogravimetric analysis. Mater Today Proc 2024;99:92–7. https://doi.org/10.1016/j.matpr.2023.05.362.

[58] Thomason JL, Rudeiros-Fernández JL. Thermal degradation behaviour of natural fibres at thermoplastic composite processing temperatures. Polym Degrad Stab 2021;188:109594. https://doi.org/10.1016/j.polymdegradstab.2021.109594.

[59] Nurazzi NM, Asyraf MRM, Rayung M, Norrrahim MNF, Shazleen SS, Rani MSA, et al. Thermogravimetric Analysis Properties of Cellulosic Natural Fiber Polymer Composites: A Review on Influence of Chemical Treatments. Polymers (Basel) 2021;13:2710. https://doi.org/10.3390/polym13162710.

[60] Nurazzi NM, Asyraf MRM, Rayung M, Norrrahim MNF, Shazleen SS, Rani MSA, et al. Thermogravimetric Analysis Properties of Cellulosic Natural Fiber Polymer Composites: A Review on Influence of Chemical Treatments. Polymers (Basel) 2021;13:2710. https://doi.org/10.3390/polym13162710.

[61] Khuntia T, Biswas S. Characterization of a Novel Natural Filler from Sirisha Bark. Journal of Natural Fibers 2022;19:3083–92. https://doi.org/10.1080/15440478.2020.1838997.

[62] Ali A, Zhang N, Santos RM. Mineral Characterization Using Scanning Electron Microscopy (SEM): A Review of the Fundamentals, Advancements, and Research Directions. Applied Sciences 2023;13:12600. https://doi.org/10.3390/app132312600.

[63] Mulyaningsih NN, Widiyatun F, Dwitiyanti N. Morphology study of Agave fiber surface by using scanning electron microscopy. J Phys Conf Ser 2021;1816:012018. https://doi.org/10.1088/1742-6596/1816/1/012018.

[64] Vijay R, Vinod A, Lenin Singaravelu D, Sanjay MR, Siengchin S. Characterization of chemical treated and untreated natural fibers from Pennisetum orientale grass- A potential reinforcement for lightweight polymeric applications. International Journal of Lightweight Materials and Manufacture 2021;4:43–9. https://doi.org/10.1016/j.ijlmm.2020.06.008.

[65] Musthaq MAhmed, Dhakal HN, Zhang Z, Barouni A, Zahari R. The Effect of Various Environmental Conditions on the Impact Damage Behaviour of Natural-Fibre-Reinforced Composites (NFRCs)—A Critical Review. Polymers (Basel) 2023;15:1229. https://doi.org/10.3390/polym15051229.

[66] Thimmegowda DY, Hindi J, Markunti GB, Kakunje M. Enhancement of Mechanical Properties of Natural Fiber Reinforced Polymer Composites Using Different Approaches—A Review. Journal of Composites Science 2025;9:220. https://doi.org/10.3390/jcs9050220.

[67] Elfaleh I, Abbassi F, Habibi M, Ahmad F, Guedri M, Nasri M, et al. A comprehensive review of natural fibers and their composites: An eco-friendly alternative to conventional materials. Results in Engineering 2023;19:101271. https://doi.org/10.1016/j.rineng.2023.101271.

[68] Mohammed M, Rahman R, Mohammed AM, Betar BO, Osman AF, Adam T, et al. Improving hydrophobicity and compatibility between kenaf fiber and polymer composite by surface treatment with inorganic nanoparticles. Arabian Journal of Chemistry 2022;15:104233. https://doi.org/10.1016/j.arabjc.2022.104233.

[69] Thapliyal D, Verma S, Sen P, Kumar R, Thakur A, Tiwari AK, et al. Natural Fibers Composites: Origin, Importance, Consumption Pattern, and Challenges. Journal of Composites Science 2023;7:506. https://doi.org/10.3390/jcs7120506.

[70] Bahrami M, Enciso B, Gaifami CM, Abenojar J, Martinez MA. Characterization of hybrid biocomposite Poly-Butyl-Succinate/Carbon fibers/Flax fibers. Compos B Eng 2021;221:109033. https://doi.org/10.1016/j.compositesb.2021.109033.

Downloads

Published

2025-08-31

How to Cite

Perima, Y., & Iman Mainil, R. (2025). The Characterization Methods of Natural Fibers (Cellulose Fibers) as Reinforcement for Polymer Matrix Composites: A Review : Natural Fibers Characterization. Jurnal Rekayasa Mesin, 20(2), 289–304. https://doi.org/10.32497/jrm.v20i2.6663

Issue

Vol. 20 No. 2 (2025): Volume 20, Nomor 2, Agustus 2025

Section

Articles

License

Copyright (c) 2025 Yoan Perima, Rahmat Iman Mainil

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Copyright of articles that appear in Jurnal Rekayasa Mesin belongs exclusively to Penerbit Jurusan Teknik Mesin Politeknik Negeri Semarang. This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.