Pengaruh Voltase dan Stick Out terhadap Cacat Permukaan Las MIG Butt Joint Aluminium 6063

Sulistyono Sulistyono, Irfan Hariz Shafly Kh

Abstract


Technological advances are currently experiencing a very rapid increase, one of which is bicycle transportation which is now popular, namely electric bicycles. In the assembly of the frame of an electric scooter, a welding process is needed, one of which is the MIG welding method. The purpose of this study is to determine the effect of welding voltage and stick out on weld defects from MIG welding results on aluminum 6063, the welding defects found are porosity, undercut, and incomplete fusion. According to the results of macro photo observations, the smaller the voltage, the less optimal the electrode melting, as well as the stick out which greatly affects the welding results, because the longer the  stick out, the more the voltage is inhibited, and the protective gas will be reduced due to the distance of the nozzle to the welding point is getting farther due to the longer stick out  distance

Keywords


Aluminum 6063; Dye penetrant test; MIG welding; Weld defects

Full Text:

PDF

References


J. G. A. Paksi, I. A. C. P. Putra, and R. Indriansyah, “Perancangan Struktur Road Bike Frame Menggunakan Aluminium 6063 Melalui Proses Optimalisasi Perlakuan Panas,” J. Tek. Mesin ITI, vol. 5, no. 2, p. 49, 2021, doi: 10.31543/jtm.v5i2.575.

A. B. Mardika, R. Febritasari, and I. K. A. Widi, “Analisa Pengaruh Kekuatan Material pada Rangka Sepeda Listrik dengan Profil Rectangular Tube terhadap Material Aluminium 6061 dan Baja Aisi 1020 menggunakan Software Ansys Workbench,” vol. xx, no. x, 2022.

B. A. Girawan et al., “Perancangan Sepeda Listrik Semoli Untuk Beban 80 Kg,” vol. 3, no. 2, pp. 1–7, 2022, doi: 10.35970/accurate.v3i2.1556.

A. Hesthi, P. Ningtyas, I. A. Pahlawan, and R. P. Putra, “Pemilihan Material Yang Aman Untuk Frame Sepeda Listrik,” vol. 20, no. 1, pp. 314–318, 2022.

A. Rahmatika, S. Ibrahim, M. Hersaputri, and E. Aprilia, “Studi Pengaruh Variasi Kuat Arus terhadap Sifat Mekanik Hasil Pengelasan GTAW Alumunium 1050 dengan Filler ER 4043,” J. Polimesin, vol. 17, no. 1, pp. 47–54, 2019.

Y. Q. B. Sugito, “ANALISA VARIASI JENIS KAMPUH PADA PENGELASAN GMAW DENGAN TIPE SAMBUNGAN BUTT JOINT ALUMUNIUM 6063 TERHADAP KEKUATAN TARIK KEKERASAN DAN STRUKTUR MIKRO,” pp. 1–15.

Asrul, K. Kamil, and M. H. Asiri, “Analisis Kekuatan Sambungan Las Metal Inert Gas (MIG) pada Logam Aluminium Paduan AA6063 dengan Variasi Arus Listrik,” Tek. Mesin" Teknol., vol. 18, no. 1, pp. 27–32, 2018, [Online]. Available: https://ojs.unm.ac.id/teknologi/article/view/7476/4347

I. Niko, I. Sihombing, U. Budiaro, and A. Fauzan Zakki, “JURNAL TEKNIK PERKAPALAN Pengaruh Posisi Pengelasan dan Bentuk Kampuh Terhadap Kekuatan Tarik dan Mikrografi Sambungan Las Metal Inert Gas (MIG) Pada Aluminium 6061 Sebagai Bahan Material Kapal,” J. Tek. Perkapalan, vol. 7, no. 4, p. 303, 2019, [Online]. Available: https://ejournal3.undip.ac.id/index.php/naval

M. S. Mustofa 1*, Togik Hidayat 2* Pelangi Eka Yuwita, S.Si., “ANALISIS KETANGGUHAN DAN CACAT PENGELASAN TERHADAP VARIASI KUAT ARUS DAN ALUR PENGELASAN TIG PADA PADUAN AL 6061,” vol. 4, no. 1, 2023.

S. Umam and F. T. Industri, “DENGAN VARIASI PENDINGINAN OLI DAN UDARA PADA MATERIAL ASTM A36 DENGAN PENGUJIAN NDT ( NON DESTRUCTIVE TEST ),” vol. 14, pp. 131–138, 2018.

B. Yunianto and P. Wicaksana, “Analisis Cacat Hasil Pengelasan Pada Pipa ASTM A106 Grade B Menggunakan Magnetic Particle Test dan Liquid Penetrant Test di Workshop Las dan Inspeksi PPSDM Migas Cepu,” vol. 25, no. 2, pp. 54–60, 2023.

G. Avilla1*, B. Suhendra2, and Viktor Naubnome, “ELEKTRODA PADA PENGELASAN SMAW TERHADAP CACAT LAS PADA PENGELASAN BAJA SS400 DENGAN METODE NON-”.

N. I. Sumardani, N. I. Setiawan, and B. W. Nuryadin, “Defect Analysis of Carbonsteel Pipe Welding Connections Using Non-Destructive Testing with the Penetrant Test Method,” 2020.

C. C. Roshan and H. V. Ram, “Non-destructive testing by liquid penetrant testing and ultrasonic testing – A review,” vol. 5, no. 2, pp. 694–697, 2019.

T. Endramawan, E. Haris, F. Dionisius, and Y. Prinka, “Aplikasi Non Destructive Test Penetrant Testing (Ndt-Pt) Untuk Analisis Hasil Pengelasan Smaw 3G Butt Joint,” JTT (Jurnal Teknol. Ter., vol. 3, no. 2, pp. 44–48, 2017, doi: 10.31884/jtt.v3i2.61.




DOI: http://dx.doi.org/10.32497/jrm.v19i2.5821

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Rekayasa Mesin

_____________________________________________________________________

   

Publisher:

Mechanical Engineering Department, Politeknik Negeri Semarang (Semarang State Polytechnic)
Address: Jl. Prof. Sudarto, SH., Tembalang, Semarang
Email: jurnalrekayasamesin@polines.ac.id
WA: 085669661997

_____________________________________________________________________

Lisensi Creative Commons
This work is licensed under a License Creative Commons Attribution-NonCommercial-ShareAlike 4.0 Internasional.

View Statistics