Perancangan Sistem Ekstruder untuk 3D Printer Cokelat

Abim Adhanis Pambudi, Setyawan Bekti Wibowo, Widia Setiawan, stephanus Danny

Abstract


The chocolate 3D printer is one such development, designed to assist humans in creating objects using chocolate as the base material. Chocolate 3D printers can produce a wide range of creative objects according to user preferences. This research project began with the design of the extruder components to be used in the chocolate extrusion process of the 3D printer. The components utilized in this design include the barrel and nozzle, Nema 17 stepper motor, 150 W 24 V silicon heater, single screw, hopper, and bracket. The design process was tailored to meet the specific requirements and objectives of this research. Experimentation will be conducted on the extruder by introducing variations in its printing speed. The research results indicate that the extruder can perform the extrusion process effectively using the mentioned components. At a temperature of 40 degrees Celsius and a print speed of 100 mm/s, the chocolate melt consistently flows out.

Keywords


3D printer chocolate; extruder; single screw

Full Text:

PDF

References


Valkenaers, H., Vogeler, F., Ferraris, E., Voet, A., Kruth, J. P., Azcárate, S., Dimov, S. A Novel Approach to Additive Manufacturing: Screw Extrusion 3D-Printing. In Proceedings of the 10th international conference on multi-material micro manufacture. 2013 October; pp. 235-238.

Sam Daley. 3D printer. https://builtin.com/3d-printing. Sam Daley; 2022 (Diakses pada 29 Maret 2023)

Lanaro, M., Forrestal, D. P., Scheurer, S., Slinger, D. J., Liao, S., Powell, S. K., Woodruff, M. A. 3D Printing Complex Chocolate Objects: Platform Design, Optimization and Evaluation. Journal of Food Engineering. December 2017; 215: p. 13-22.

Reza, M. dan Setyawan, B.W. Pengaruh Movement Speed dan Kecepatan Putar Screw Extruder Terhadap Hasil Cetak Cokelat pada Mesin 3D Printing. Indonesia: Universitas Gadjah Mada; 2021.

Sinangling, G. H. dan Setyawan, B. W. Perancangan dan Pembuatan Mesin 3D Printer untuk Pencetakan Cokelat Dengan Metode Screw Extrusion Based Printing. Indonesia: Universitas Gadjah Mada; 2022.

Lee, J. M., Yeong, W. Y. A Preliminary Model of Time-Pressure Dispensing System for Bioprinting Based on Printing and Material Parameters: This Paper Reports A Method to Predict and Control the Width of Hydrogel Filament for Bioprinting Applications. Virtual and Physical Prototyping. January 2015; 10(1): p. 3-8.

Chen, X. B., Kai, J. ìModeling of Positive-Displacement Fluid Dispensing Processes, î IEEE Trans. On Electronics Packaging Manufacturing, vol. 27. 2004; pp. 157-163.

Chen, X. B., Shoenau, G., Zhang, W. J. Modeling of Time-Pressure Fluid Dispensing Processes. IEEE Transactions on Electronics Packaging Manufacturing, 2000; 23(4), 300-305.

Ness, C.Q. dan Lewis, A.R.,. Adhesives/Epoxies & Dispensing, Surface Mount Technology (SMT). 1998 May; pp. 114-122.

Mantihal, S., Prakash, S., Godoi, F. C., Bhandari, B. Optimization of Chocolate 3D Printing by Correlating Thermal and Flow Properties with 3D Structure Modeling. Innovative Food Science & Emerging Technologies, 2017; 44: 21-29.

Muhamad A., R., Anerasari M., Selastia Y., Rancang Bangun Alat Screw Extruder Pembuatan Medium Density Fiberboard Berbasis Serat Tandan Kosong Kelapa Sawit dan Perekat High Density Polyethylene (HDPE) (Uji Kinerja Alat Ditinjau Dari Efisiensi Screw Extruder). Januari 2022. p 37-49

Simanjuntak D. Studi Pengaruh Kenaikan Temperatur Pada Sambungan Konduktor Aluminium Dengan Tembaga. Indonesia: Univeritas Indonesia. 2010.

Gaspar-Cunha, A., Covas, J. A., Costa, M. F. P., Costa, L. Optimization of single screw extrusion. 2018.

Hassan Eslami. Understanding Screw Design for Film Extrusion Process. https://macroeng.com/understanding-screw-design-for-film-extrusion-process. Hassan Eslami: 2015 (Diakses pada 5 April 2023).

Campbell, G., Spalding, M. Single-screw extrusion: introduction and troubleshooting. Analysing and Troubleshooting Single Screw Extrusion, 2013. 1-22.

Mahardika R, Musthofa, M., Nurdin R.A., Wibowo S.B., Effect of movement speed and flow capacity on the printed chocolate in 3D printing machine. AIP Conf. Proc. 6 November 2023; 2693 (1): 030017. https://doi.org/10.1063/5.0118855

Rando, P., Ramaioli, M., Food 3D printing: Effect of Heat Transfer on Print Stability of Chocolate. Journal of Food Engineering. 294. 110415. 10.1016/j.jfoodeng.2020.110415.




DOI: http://dx.doi.org/10.32497/jrm.v19i2.5099

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Rekayasa Mesin

_____________________________________________________________________

   

Publisher:

Mechanical Engineering Department, Politeknik Negeri Semarang (Semarang State Polytechnic)
Address: Jl. Prof. Sudarto, SH., Tembalang, Semarang
Email: jurnalrekayasamesin@polines.ac.id
WA: 085669661997

_____________________________________________________________________

Lisensi Creative Commons
This work is licensed under a License Creative Commons Attribution-NonCommercial-ShareAlike 4.0 Internasional.

View Statistics

slot gacor slot gacor hari ini slot gacor 2025 demo slot pg slot gacor slot gacor