Desain dan Pembuatan Mesin CNC Milling untuk Pembuatan Ukiran Kerajinan Kayu

Sunarto Sunarto, Hartono Hartono, Carli Carli, Daryadi Daryadi, Bambang Tjahjono, Trio Setiyawan

Abstract


The furniture industry is an industry that processes raw materials or semi-finished materials from wood, rattan and other natural raw materials into finished products that are ready for use and have higher added value. There are many furniture industries spread across Indonesia, with quite large centers located in Jepara, Sukoharjo, Surakarta, Klaten, and others. Along with the development of industrial technology, making work becomes more efficient and easier. Therefore, it is necessary to apply technology in the industrial world in Indonesia, especially in the furniture industry. The current technology commonly applied to the furniture industry is the CNC milling machine. The use of this CNC machine aims to solve problems in the production of wood carving crafts or furniture, such as mass products that cannot be the same and product processing time that cannot be ascertained. Besides, the use of this CNC machine can reduce cycle times and increase the work efficiency of the furniture industry. Based on this information, we had the idea to make this CNC milling machine to support the progress of the Indonesian furniture industry. During the manufacturing of this CNC machine, we carried out theoretical research and field surveys. The research stages we carried out were identification of needs, problem formulation, synthesis, analysis, evaluation and presentation. Based on these results, it was found that the workable raw material had a maximum dimension of 40 × 40 [cm], a maximum feed rate of 192 [mm/min], a maximum spindle rotating speed of 12,000 [rpm] and a cutting velocity of 75.4 [m/min].


Keywords


Furniture industry; CNC Milling Machine; Wood Material

Full Text:

PDF

References


Aprilian, Fajar, dkk. Pengembangan Mesin CNC Router 4-Axis Guna Mendukung Produksi IndustriKreatif. Semarang: Jurusan Teknik Mesin Politeknik Negeri Semarang. 2019

ASM Meterial Data Sheet Alumunium 6063 T5. http://asm.matweb.com/search/Specific

Material.asp?bassnum=MA6063T5. Diakses pada 25 September 2020.

Budynas, Richard G. dan J. Keith Nisbett. Shigley’s Mechanical Engineering Design. United States of America: McGraw-Hill Education. 2015

Cross, Nigel. Engineering Design Methods Strategies for Product Design Third Edition. New York: John Wiley & Sons, Ltd. 2004

Costes, Jean-Philippe dan Pierre Larricq. Towards high cutting speed in wood milling. France: INRA, EDP Sciences. 2002

Hardi, Supri dkk. Rancang Bangun Mesin CNC Milling 3-Axis untuk Anggrave PCB Berbasis Arduino Uno. Lhoksumawe: Jurusan Teknik Elektro Politeknik Negeri Lhoksumawe. 2019

Harrizal Ikhlash Syukran, ddk. Rancang Bangun Sistem Kontrol Mesin CNC Milling 3 Axis Menggunakan Close Loop System. Pekanbaru: Jurusan Teknik Mesin Universitas Riau. 2017

Immanuel, Jovi, dkk. Perancangan dan Analisis Rangka Mesin Dekstop CNC Milling. Jakarta: Universitas Tarumanegara. 2018

Joseph E, Shigley., Larry D, Mitchell., dan Gandhi ,Harahap. Perencanaan Teknik Mesin. Edisi ke empat, Jilid 1. Jakarta: Erlangga, 1984.

Handson, Technology User Manual. www.handsontec.com. Diakses pada 25 Juli 2020.

Purnomo, Edi, dkk. Rancang Bangun Mesin CNC Hybrid dengan Sistem Kerja Printer 3 Dimensi dan Laser Engrave untuk Material Berbahan Kayu. Semarang: Jurusan Teknik Mesin Politeknik Negeri Semarang. 2019

Setiawan, Heri. Pengujian Kekuatan Tarik Produk Cor Propeler Alumunium. Kudus: Universitas Muria Kudus. 2015

Sularso dan Kiyokatsu Suga. Dasar Perancangan dan Pemilihan Elemen Mesin. Jakarta: PT. Pradnya Paramita.2004

Ulinnuha, Fahrul, dkk. Prototipe Mesin CNC Laser Cutting untuk Pembuatan Produk Kreatif Bahan Akrilik. Semarang: Jurusan Teknik Mesin Politeknik Negeri Semarang. 2019.

Zulfikar, Usmardi, Hanafi. Rancang Bangun Milling dan Drilling Sederhana dan Murah. Lhoksumawe: Jurusan Teknik Elektro Politeknik Negeri Lhoksumawe. 2018




DOI: http://dx.doi.org/10.32497/jrm.v17i1.3496

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Jurnal Rekayasa Mesin

_____________________________________________________________________

   

Publisher:

Mechanical Engineering Department, Politeknik Negeri Semarang (Semarang State Polytechnic)
Address: Jl. Prof. Sudarto, SH., Tembalang, Semarang
Email: jurnalrekayasamesin@polines.ac.id
WA: 085669661997

_____________________________________________________________________

Lisensi Creative Commons
This work is licensed under a License Creative Commons Attribution-NonCommercial-ShareAlike 4.0 Internasional.

View Statistics