Smart Helmet As Driving Safety

Authors

  • Sri Kusumastuti Politeknik Negeri Semarang
  • Sindung Hadwi Widi Sasono

DOI:

https://doi.org/10.32497/jaict.v8i1.4302

Keywords:

Arduino Nano, Arduino Pro Mini, Helm, MPU6050, NRF24L01

Abstract

One of the common causes of accidents is physiological factors such as drowsiness. A  helmet  is a device used to reduce the risk of head injury when an accident occurs while driving. Helmets placed on motorbikes often experience theft to the detriment of the helmet owner. A helmet was created to reduce the risk of an accident, warn motorists when they are drowsy, and provide a warning when a helmet is stolen. The method begins with designing devices, preparing devices, testing, repairing, and adjusting devices. The main components used are Arduino Nano and Arduino Pro Mini. The input components are a pulse sensor, MPU6050 sensor, touch switch, NRF24L01 receiver, rope clip, on/off push button, and limit switch. The output components are one channel relay, NRF24L01 transmitter, and speakers. From the results of testing the device, the helmet will be connected to the motorbike if appropriately used, the speaker will send a rest notification if the rider is drowsy, and the helmet alarm will sound loud when someone wants to steal the helmet.

References

. Agustina F., dkk. (2020). Helm Pintar Berbasis Arduino Pro Mini untuk Mendeteksi Kecelakaan. Jurnal Simetris, 11(2), 352-362.

. Amirullah, dkk. (2018). Sistem Peringatan Dini Menggunakan Deteksi Kemiringan Kepala pada Pengemudi Kendaraan Bermotor yang Mengantuk. Jurnal Teknik ITS, 7(2), 2337-3539.

. Budiman, A.R., dkk. (2018). Desain Perancangan Helm Pintar dengan Notifikasi Keselamatan Berkendara untuk Pengendara Sepeda Motor. Universitas Telkom.

. Edwinanto., dkk. (2019). Helm Cerdas untuk Keamanan Sepeda Motor Berbasis IoT. Jurnal Fidelitiy, 1(2), 12-30.

. Faisal, I.F., dkk. (2019). Pengembangan Aplikasi Pendeteksi Kantuk pada Pengendara Kendaraan Bermotor dengan Menggunakan Sensor Detak Jantung pada Smartwatch. Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, 3(10), 9568-9578.

. Hidayat, A.M.N., & Akbar, M.N. (2020). Sistem Keamanan Sepeda Motor Menggunakan Arduino. Jurnal Informartika, 2(2), 30-38.

. Nugroho, M.A., dkk. (2019). Desain dan Implementasi Helm Pintar dengan Fitur Bluetooth. Jurnal e-Proceeding of Engineering, (6)2, 2609-2616.

. Prasetyawan, P., dkk. (2021). Internet of Things Menggunakan Firebase dan NodeMCU untuk Helm Pintar. Jurnal ELTIKOM, 5(1), 32-39.

. Purwanto, E.H. (2015). Signifikan Helm SNI sebagai Alat Pelindung Pengendara Sepeda Motor dari Cidera Kepala. Jurnal Standardisasi, 17(1), 31-46.

. Septiano, A., & Ghozali, T. (2020). NRF24L01 sebagai Pemancar/ Penerima untuk Wireless Sensor Network. Jurnal Tekno, 17(1), 26-34.

. Suryono., dkk. (2022). Rancang Bangun Pengontrol Peralatan Listrik Menggunakan Sensor Sentuh dengan Pengunci Radio Frekuensi Identifikasi. 406-420.

. Syahriza. (2019). Kecelakaan Lalu Lintas : Perlukah Mendapatkan Perhatian Khusus. Jurnal Averrous, 5(2), 89-101.

. Rachmat, H.H., & Ambaransari, D.R. (2018). Sistem Perekam Detak Jantung Berbasis Pulse Heart Rate Sensor pada Jari Tangan. Jurnal Elkomika, 6(3), 344-356.

. Trisnawati, F., & Prasetyawan, P. (2020). Selamat Mudik Menggunakan Helm Berbasis Internet of Things (IoT). Jurnal ICTEE, 1(1), 6-10.

Downloads

Additional Files

Published

2023-03-10

Issue

Vol. 8 No. 1 (2023)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).