Karakteristik Marshall Dalam Aspal Campuran Panas AC-WC Terhadap Variasi Temperatur Perendaman

Leily Fatmawati


Road roughness layer construction work in Indonesia as long as this concern, i.e. damaged before age plans, although not all of these statements are valid in General. As an indication of overload or cause factor is often referred to by Physical Damage Factor (P.D.F.), time loaded and environmental change or the drainage function is not optimal. All three of these factors as the cause of the occurrence of the damage. The use of a material with a better quality of aggregate gradation of mainly filler material as well as asphalt binder material, as well as planning, quality of execution and how strict scrutiny. This research was conducted to measure up to the temperature influence of roughness asphalt macadam on the mixture of hot mix asphalt AC-WC using hard asphalt (Asphalt Pen 60/70) about Marshall characteristics and the result expected can provide information of Department of Public Work. In the study done of making test with variations in soaking temperature for analyzing how performance degradation when soaking temperature paved mixture does not fit standard (standard temperature of 60° C).


Asphalt Pen 60/70, AC-WC, Marshall, Soaked Temperature

Full Text:


DOI: http://dx.doi.org/10.32497/wahanats.v18i2.981


  • There are currently no refbacks.






 Publisher : Jurusan Teknik Sipil, Politeknik Negeri Semarang  wahanasipil@polines.ac.id, jurnalwahana@gmail.com https://jurnal.polines.ac.id/index.php/wahana
 Department of Civil Engineering, Politeknik Negeri Semarang (State Polytechnic of Semarang) Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275  +62 24 7473417 Ext. 212 For Journal Subscription

Creative Commons License
Wahana TEKNIK SIPIL: Jurnal Pengembangan Teknik Sipil (p-ISSN : 0853-8727 | e-ISSN : 2527-4333) is published by Politeknik Negeri Semarang under Creative Commons Attribution 4.0 International License.