PENINGKATAN KUAT LENTUR BETON FAST TRACK MUTU FS 45 DENGAN ADMIXTURE MR 73
DOI:
https://doi.org/10.32497/wahanats.v30i2.7250Abstract
A number of studies and trials on concrete have been conducted to improve concrete quality and address common issues in the construction industry, such as project deadlines. Efforts to enhance concrete quality include modifications to achieve high concrete strength at 7 days using chemical admixtures. This research aims to analyze the effect of using MR 73 admixture on the flexural strength of concrete at the ages of 7 and 28 days. The research method employed is experimental quantitative. The results indicate that concrete with MR 73 admixture at a 0.4% dosage achieved an average flexural strength of 43.5042 kg/cm² at 7 days, compared to normal concrete with 35.34 kg/cm² at the same age. At 28 days, concrete with MR 73 admixture at a 0.4% dosage reached an average flexural strength of 49.97 kg/cm², compared to normal concrete with 45.54 kg/cm². The MR 73 admixture proved to increase the flexural strength of concrete by 23% at 7 days and 10% at 28 days compared to normal concrete
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).


