TINJAUAN PENGARUH PENAMBAHAN SERAT POLYPROPYLENE DAN PEMANFAATAN BETON ULTRA HIGH PERFORMANCE TERHADAP KETAHANAN ABRASI BETON

Authors

  • Maulana Nur Hidayat Universitas Muhammadiyah Surakarta
  • Mochamad Solikin Universitas Muhammadiyah Surakarta
  • Senja Rum Harnaeni Universitas Muhammadiyah Surakarta

DOI:

https://doi.org/10.32497/wahanats.v30i1.6062

Keywords:

abrasi, beton serat, uhpc, fly ash, silicafume.

Abstract

Concrete is a material that is widely used in the construction process, proven in various sectors widely used such as foundation construction, building structures, road pavements and water channels. However, concrete still has many weaknesses in abrasion resistance. To improve the quality of concrete abrasion resistance, the addition of Polypropylene fibers and the use of Ultra High Performance Concrete (UHPC) can be used. The fibers used in the study used Polypropylene fibers and the compressive strength of concrete with the UHPC method was planned to be more than 80 MPa. Mix planning was carried out using the American Concrete Institute (ACI) method with adjustments from trial and error. Furthermore, testing was carried out and test data was obtained which will be continued with the analysis and discussion process to draw conclusions. This study is intended to test the abrasion resistance of UHPC concrete with the addition of 0.2, 0.4, 0.6 polypropylene fibers, with the pressurized water spray method at the age of 28 days. The test results showed 0.351%, 0.284%, 0.369%.

References

Anggraini, R. P. B., & Solikin, M. (2023). Pengaruh Pemakaian Silica Fume Terhadap Karakteristik Beton Dengan Variasi Kandungan Fly Ash. Prosiding Seminar Nasional Teknik Sipil 2023, 111”“118.

Fonseka, I., Mohotti, D., Wijesooriya, K., Lee, C.-K., & Mendis, P. (2023). Influence of Graphene oxide on abrasion resistance and strength of concrete.

Guo, J., Xia, X., Zhang, P., & Wang, K. (2023a). Reinforcement mechanism of nano-SiO2 and polypropylene fibers on concrete abrasion resistance subject to dynamic sandy water. Journal of Materials Research and Technology, 27, 1630”“1650. https://doi.org/10.1016/j.jmrt.2023.09.321

Guo, J., Xia, X., Zhang, P., & Wang, K. (2023b). Reinforcement mechanism of nano-SiO2 and polypropylene fibers on concrete abrasion resistance subject to dynamic sandy water. Journal of Materials Research and Technology, 27, 1630”“1650. https://doi.org/10.1016/j.jmrt.2023.09.321

HADI, S. (2021). Pengaruh Air Soda Terhadap Kuat Tekan Beton.

Ganec Swara, 15(2), 1181. https://doi.org/10.35327/gara.v15i2.234

Hamada, H. M., Abed, F., Binti Katman, H. Y., Humada, A. M., Al Jawahery, M. S., Majdi, A., ”¦ Thomas, B. S. (2023). Effect of silica fume on the properties of sustainable cement concrete. Journal of Materials Research and Technology, 24, 8887”“8908. https://doi.org/10.1016/j.jmrt.2023.05.147

Hasnat, A., & Ghafoori, N. (2021). Abrasion Resistance of Ultra-High-Performance Concrete for Railway Sleepers. Urban Rail Transit, 7(2), 101”“116. https://doi.org/10.1007/s40864-021-00145-8

Hidayat, M. N., & Solikin, M. (2023). ANALISIS ABRASI, KUAT TARIK DAN KUAT TEKAN SAMBUNGAN BETON LAMA DENGAN BETON SELF COMPACTING (SCC) DENGAN PENAMBAHAN FIBER DAN FLY. http://eprints.ums.ac.id/id/eprint/111168, 1, 53”“54.

Htet, P., Chen, W., Hao, H., & Shaikh, F. (2023). Influence of micro basalt and recycled macro polypropylene hybrid fibre on physical and mechanical properties of recycled aggregate concrete. Journal of Building Engineering, 76. https://doi.org/10.1016/j.jobe.2023.107083

Kamjou, A. S., Khaloo, A., & Hassanpour, S. (2022). Experimental and numerical investigation of minimum required fiber content in bending characteristics of 100 MPa UHPC-formulated concrete. Case Studies in Construction Materials, 16. https://doi.org/10.1016/j.cscm.2022.e01066

Lewa, S. T. paiding, & Kusumaningrum, P. (2020). Pengaruh Penambahan Serat Baja Terhadap Sifat Mekanis Reactive Powder Concrete. Indonesian Journal of Construction Engineering and Sustainable Development (Cesd), 3(2), 49. https://doi.org/10.25105/cesd.v3i2.8320

Li, J., Wu, Z., Shi, C., Yuan, Q., & Zhang, Z. (2020). Durability of ultra-high performance concrete ”“ A review. Construction and Building Materials, 255, 119296. https://doi.org/10.1016/j.conbuildmat.2020.119296

Li, W., Guo, Y., Zhang, X., Dong, W., Li, X., Yu, T., & Wang, K. (2024). Development of self-sensing ultra-high-performance concrete using hybrid carbon black and carbon nanofibers. Cement and Concrete Composites, 148(January), 105466. https://doi.org/10.1016/j.cemconcomp.2024.105466

Liu, Q., Vabbersgaard, L., Zhang, M., & Wu, M. (2024). Abrasion damage of concrete for hydraulic structures and mitigation measures : A comprehensive review. Construction and Building Materials, 422(September 2023), 135754. https://doi.org/10.1016/j.conbuildmat.2024.135754

Luthfiana, M., Budi, A. S., & Safitri, E. (2019). Kajian Tegangan-Regangan dan Kuat Tekan Beton HVFA Memadat Sendiri terhadap Beton Normal dengan Kekangan Topi Baja. Matriks Teknik Sipil, 7(4), 466”“470. https://doi.org/10.20961/mateksi.v7i4.38491

Maryani, D., & Lisantono, A. (2023). Pengaruh Penambahan Serat Polyprophylene Terhadap Sifat Mekanik Beton Expanded Polystyrene. Jurnal Teknik Sipil, 17(3), 208”“214. https://doi.org/10.24002/jts.v17i3.7887

Mezzal, S. K., Al-Azzawi, Z., & Najim, K. B. (2021). Effect of discarded steel fibers on impact resistance, flexural toughness and fracture energy of high-strength self-compacting concrete exposed to elevated temperatures. Fire Safety Journal, 121(June 2020), 103271. https://doi.org/10.1016/j.firesaf.2020.103271

Mubarak, F., Solikin, M., & Sunarjono, S. (2023). PERBANDINGAN TINGKAT KEHALUSAN FLY ASH TERHADAP DURABILITAS DAN SIFAT MEKANIS HIGH VOLUME FINE FLY ASH-SELF COMPACTING CONCRETE.

Muhammad Kemal Rafif, & Alfinna Mahya Ummati. (2023). Pengaruh pasang surut air laut terhadap kekuatan beton komposit material Ground Granulated Blast Furnace Slag (GGBFS). PADURAKSA: Jurnal Teknik Sipil Universitas Warmadewa, 12(2), 218”“227. https://doi.org/10.22225/pd.12.2.6518.218-227

Panda, S., Sarkar, P., & Davis, R. (2021). Abrasion resistance and slake durability of copper slag aggregate concrete. Journal of Building Engineering, 35(August), 101987. https://doi.org/10.1016/j.jobe.2020.101987

Pham, T. M., Hyde, H., Kaung, M. K., Zhuge, Y., Tran, D. T., Vlietstra, D., & Tran, T. M. (2024). Comparative impact behaviours of ultra high performance concrete columns reinforced with polypropylene vs steel fibres. Defence Technology. https://doi.org/10.1016/j.dt.2024.04.016

Pranav, S., Lahoti, M., Muthukumar, G., & Yang, E. H. (2024). Clinker-free CaO-activated silica fume as a cementitious binder for pavement application. Resources, Conservation and Recycling Advances, 22. https://doi.org/10.1016/j.rcradv.2024.200218

Pratama, L. A., Rifqi, A. H., & Riyadi, M. (2021). Kinerja Serat Kawat Bendrat Sebagai Bahan Tambah Beton Fas 0.4. Construction and Material Journal, 3(1), 33”“40. https://doi.org/10.32722/cmj.v3i1.3744

Prihapsari, S. D., Adilah, N. A., Yaman, A., Rosadi, A. S. Z., Pratiwi, L. A., Azaki, N., ”¦ Azhari, N. F. (2022). INFORMASI STATISTIK INFRASTRUKTUR PUPR 2022. Dalam INFORMASI STATISTIK INFRASTRUKTUR PUPR 2022 (Vol. 1, hlm. 1”“67). Kementrian Pekerjaan Umum dan Perumahan Pusat Data dan Teknologi Informasi Jl. Patimura No. 20 Kebayoran Baru Jakarta Selatan.

Pujianto, A., Faizah, R., Wijaya, D. A., Abdurazak, J., Prayuda, H., & Wijaya, H. (2021). Kuat Tekan dan Tarik Belah Beton Serat Menggunakan Aggregat Ringan. Semesta Teknika, 24(1), 1”“9. https://doi.org/10.18196/st.v24i1.12084

Pyo, S., Abate, S. Y., & Kim, H. K. (2018). Abrasion resistance of ultra high performance concrete incorporating coarser aggregate. Construction and Building Materials, 165, 11”“16. https://doi.org/10.1016/j.conbuildmat.2018.01.036

Rahmawati, R., Zulfadly, Z., & Jamaluddin, J. (2021). Perkerasan Kaku Jalan Pantai Dengan Menggunakan Pasir Laut. Jurnal Karajata Engineering, 1(1), 7”“15. https://doi.org/10.31850/karajata.v1i1.688

Rochman, A., Ujianto, M., Nurchasanah, Y., & Ernawati, S. (2023). PEMANFAATAN LIMBAH PLASTIK COR SEBAGAI AGREGAT KASAR OLAHAN PADA BETON.

Saleem, M. A., Liaquat, F., Saleem, M. M., Aziz, M., Aslam, F., & Mohamed, A. (2024). Development and characterization of non-proprietary ultra high performance concrete. Heliyon, 10(2), e24260. https://doi.org/10.1016/j.heliyon.2024.e24260

Saputra, R. A., Helmi Pratama, L., Widodo, P., Susanti, R., & Vokasi, S. (2023). Inovasi pemanfaatan serat polypropylene dan limbah abu cangkang sawit sebagai bahan subtitusi beton, 1(2). Diambil dari https://ejournal3.undip.ac.id/index.php/pilars

Satria, R. G., Wibowo, W., & Safitri, E. (2019). Pengaruh Kadar Fly Ash Terhadap Kuat Tekan Pada High Volume Fly Ash Self Compacting Concrete (Hvfa-Scc) Benda Uji Silinder D 7,5 Cm X 15 Cm Usia 14, 28 Dan 90 Hari. Matriks Teknik Sipil, 7(3), 226”“232. https://doi.org/10.20961/mateksi.v7i3.36492

Solikin, Mochamad, & Nabiilah, M. (2022). Analisis Pengaruh Penggunaan Variasi Fly Ash Terhadap Karakteristik Beton Dengan Penambahan Kapur Tohor. Prosiding Seminar Nasional Teknik Sipil 2022 Teknik Sipil Fakultas Teknik Universitas Muhammadiyah Surakarta, 116”“123.

Solikin, Mochamad, Setiawan, B., Afani, I. R., Perdana, H. R., & Sabrina, N. (2024). Analisis Serangan Sulfat pada Self Compacting Concrete ( SCC ) menggunakan Variasi Penambahan Silica fume dengan Metode Perubahan Panjang, 09(01), 115”“126. https://doi.org/10.29244/jsil.9.1.115-126

Solikin, Mochammad, Nur Ihsan, I., Setiawan, B., & Nurchasanah, Y. (2021). Analisis Kehalusan Fly Ash Sebagai Bahan Substitusi Semen Terhadap Kuat Tekan Dan Durabilitas Beton High Volume Fly Ash Mutu Normal. Prosiding CEEDRiMS 2021, 157”“163.

Su, F., Ma, X., Lin, Y., & He, T. (2024). Exploring the factors influencing the abrasion resistance of hydraulic concrete based on underwater steel ball test. Case Studies in Construction Materials, 20(October 2023). https://doi.org/10.1016/j.cscm.2024.e03020

Sudjatmiko, A., & Dredha Pradipta, A. (2021). ANALISIS KUAT TEKAN, KUAT TARIK BELAH, DAN ABSORPSI PADA BETON DENGAN PENAMBAHAN LIMBAH SLAG BAJA YANG VARIATIF, SUPERPLASTICIZER, DAN SERAT STEEL WIRETERHADAP BETON NORMAL. Simposium Nasional Rapi XX-2021 FT UMS. Diambil dari https://proceedings.ums.ac.id/rapi/article/view/144/144

Tayeh, B. A., Akeed, M. H., Qaidi, S., & Bakar, B. H. A. (2022). Influence of microsilica and polypropylene fibers on the fresh and mechanical properties of ultra-high performance geopolymer concrete (UHP-GPC). Case Studies in Construction Materials, 17. https://doi.org/10.1016/j.cscm.2022.e01367

Ujianto, M., Ardiansyah, E. L., Ilokana, G. O., & Falah, M. F. (2018). Optimization of superplasticizer MasterGlenium SKY 8614 with added materials fly ash, steel slag, and silica fume for high strength concrete. Dalam IOP Conference Series: Materials Science and Engineering (Vol. 403). Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/403/1/012026

Wantoro, M. (2023). ST-20 ANALISIS TIDAK TERCAPAINYA MUTU BETON K-250 DENGAN PENGGUNAAN AGREGAT DARI QUARRY SUNGAI ABUKAREI SERUI. KoNTekS Ke-17 (konferensi teknik sipil), 1(1), 1”“12.

Warudkar, A., & Elavenil, S. (2020). A comprehensive review on abrasion resistance of concrete. International Journal of Applied Science and Engineering, 17(1), 29”“43. https://doi.org/10.6703/IJASE.202003_17(1).029

Wu, F., Yu, Q., & Chen, X. (2022). Effects of steel fibre type and dosage on abrasion resistance of concrete against debris flow. Cement and Concrete Composites, 134(September), 104776. https://doi.org/10.1016/j.cemconcomp.2022.104776

Zarrabi, N., Moghim, M. N., & Eftekhar, M. R. (2021). Effect of hydraulic parameters on abrasion erosion of fiber reinforced concrete in hydraulic structures. Construction and Building Materials, 267(xxxx), 120966. https://doi.org/10.1016/j.conbuildmat.2020.120966

Downloads

Published

2025-06-30

Issue

Vol. 30 No. 1 (2025): Wahana Teknik Sipil

Section

Articles

License

Copyright (c) 2025 Wahana Teknik Sipil: Jurnal Pengembangan Teknik Sipil

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).