PENINGKATAN KUAT LENTUR BETON FAST TRACK MUTU FS 45 DENGAN ADMIXTURE MR 73

Authors

  • FAISAL BURHANNUDIN Universitas Veteran Bangun Nusantara
  • YUSUF ALI Universitas Veteran Bangun Nusantara
  • Yosafat Damar Wicaksono Universitas Veteran Bangun Nusantara
  • Rida Handiana Devi Universitas Veteran Bangun Nusantara

DOI:

https://doi.org/10.32497/wahanats.v30i2.5925

Keywords:

Fast Track Concrete, Admixture, Flexural Strength

Abstract

A number of studies and concrete trials have been undertaken in an effort to improve the quality of concrete and address common issues in the construction industry, such as project deadlines. Efforts that have been made to improve the quality of concrete include modifying the strength of high concrete at 7 days of age using chemical admixtures. This research aims to determine the effect of the MR 73 admixture on the flexural strength of concrete at 7 and 28 days of age. The research method used is quantitative experimentation. The research results show that concrete with an admixture of MR 73 at a dosage of 0.4% at 7 days of age has an average flexural strength of 43.5042 kg/cm ², while normal concrete at the same age has a flexural strength of 35.34 kg/cm ². At 28 days of age, concrete with an admixture of MR 73 at a dosage of 0.4% reaches an average flexural strength of 49.97 kg/cm ², compared to normal concrete which reaches 45.54 kg/cm ². The MR 73 admixture has been proven to increase the flexural strength of concrete by 23% at 7 days and by 10% at 28 days compared to normal concrete.

References

Aprilwelni, S., dan Wirawan, N.B., 2020, Kuat Tekan Beton Mutu Tinggi dengan Memanfaatkan Fly Ash dan Bubuk Kaca Sebagai Bahan Pengisi, Saintis, 29(1): 61-68.

ASTM-C33. 2003. Standard Specification for Concrete Aggregates. Annual Books of ASTM standards. USA.

Hidayat, A., Rismalinda, dan Afrina, Y., 2023, Job Mix Design Beton K-250 Menggunakan Metode DoE (Departemen of Environment), JURNAL APTEK, 15(2): 158-162.

Hudori, M., Tandedi, M., Sentanu, A.T., dan Ferdinand, M.A., 2022, Studi pengujian kadar lumpur agregat halus pada pasir di kota batam, JURNAL RAB CONTRUCTION RESEARCH, 7(1): 96-103.

Kementrian Pekerjaan Umum dan Perumahan Rakyat. 2023. Kementrian PUPR Targetkan Pembangunan Tahap 1 IKN Nusantara Rampung di 2024. URL: https://pu.go.id/berita/kementerian-pupr-targetkan-pembangunan-tahap-i-ik n-nusantara-rampung-di-2024#:~:text=Kementerian%20PUPR%20 Targ e tkan%20Pembangunan%20Tahap%20I%20IKN%20Nusantara%20Rampung%20di%202024. Diakses tanggal 8 Februari 2024.

Nasruddin, Sampebulu, V., dan Mushar, P., 2020, Efek penambahan admixture terhadap kuat tekan beton scc pada umur 7 hari dengan metode wet curing, Jurnal Lingkungan Binaan Indonesia, 9(1): 1-5.

Nurokhman, Kristyanto, H., Subagyo, S., dan Hermanto, H., 2023, Komparasi agregat progo dan merapi dan pengaruhnya terhadap mutu beton fs 45, CivETech, 5 (2): 31-45.

Standar Nasional Indonesia. 2002. SNI 03-6821-2002 tentang Spesifikasi Agregat Ringan untuk Batu Cetak Beton Pasangan Dinding. Badan Standarisasi Nasional. Jakarta.

Standar Nasional Indonesia. 2011. SNI 4431:2011 tentang Cara uji kuat lentur beton normal dengan dua titik pembebanan. Badan Standarisasi Nasional. Jakarta.

Standar Nasional Indonesia. 2012. SNI 7656:2012 Tentang Tata Cara Pemilihan Campuran untuk Beton Normal, Beton Berat, dan Beton Massa. Badan Standardisasi Nasional, Indonesia.

Standar Nasional Indonesia. 2016. SNI 1970:2016 tentang Metode Uji Berat Jenis Dan Penyerapan Air Agregat Halus. Badan Standarisasi Nasional Jakarta.

Sukamta, Lie, H.A., dan Dianugrah, R., 2023, Pengaruh penggunaan portland composite cement sebagai subtitusi ordinary Portland cement pada beton rigid pavement dan pengaruhnya terhadap mutu dan waktu ikat awal semen, Jurnal Teknik Sipil, 12 (2): 105-115.

Downloads

Published

2025-12-18