KAJIAN EFISIENSI TONASE KONSTRUKSI BAJA PRE￾ENGINEERING BUILDING PADA PROYEK STASIUN KRL DI KOTA JAKARTA
DOI:
https://doi.org/10.32497/wahanats.v27i2.4147Keywords:
analisis struktur, struktur baja, pre-engineering building, quantity take off, efisiensiAbstract
Technological advances offer new breakthroughs that are more effective and
efficient, including in terms of construction methods. One of the breakthroughs is the
steel construction of pre-engineering buildings. This study aims at calculating how
much tonnage efficiency in steel construction pre-engineering building when
compared to conventional steel construction. This research methodology starts from
collecting secondary data from one of Commuter Line Station Project in Jakarta
City, then modeling conventional steel construction using ETABS software. The
results are analyzed by manual structural calculations. After that, quantity takeoff is
undertaken towards conventional steel construction and pre-engineering building.
The total tonnage for pre-engineering steel construction is 203.45 tons while the
total tonnage for conventional steel construction is 346.48 tons. The efficiency of
steel construction pre-engineering building is 41.25%.
References
Aher, J., 2019, Relative Investigation of Multi-storey Structure into PEB and RCC, vol. 06, no. 02 , pp. 2596”“2601.
Badan Standardisasi Nasional, 2019, Tata Cara Perencanaan Ketahanan Gempa Untuk Struktur Bangunan Gedung dan Non Gedung Sebagai Revisi dari Standar Nasional Indonesia. SNI 1726:2019, BSN.
Badan Standardisasi Nasional, 2020, Beban Desain Minimum dan Kriteria Terkait Untuk Bangunan Gedung dan Struktur. SNI 1727:2020, BSN.
Badan Standardisasi Nasional, 2020, Spesifikasi untuk bangunan gedung baja struktural, SNI 1729:2020, BSN.
Diware, S.D., & Bais, M.M., 2021, Comparative Study & Analysis of Pre Engineered Building (PEB) Management With Respect to Normal Construction. International Journal of Engineering Technology Research.& Management, vol. 05, no. 12, pp. 69-73.
Gawade, M.D., & Waghe, U.P., 2018, Study of Pre-Engineered Building Concept. Journal of Research in Engineering and Applied Sciences, vol. 03, no. 03, pp. 88 91.
Kadam, A.M., & Talikoti, R.S., 2016, Aircraft Hanger Design Pre-Engineered Building. International Journal of Modern Trends in Engineering and Research, vol. 02, no. 7, pp. 522-526.
Wakchaure, S. & Dubey, N.C., 2016, Design and Comparative Study of Pre-Engineered Building. International Journal of Engineering Development and Research, vol. 04, no. 2, pp. 2108-2113.
Yazhini, R. & Priyadharshini, A., 2021, Analysis and Design of Pre-Engineered Building. International Research Journal of Engineering and Technology, vol. 08, no. 4, pp. 177-180.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
