Proses Permesinan Non Konvensional Dengan Abrasive Water Jet Machining Untuk Material Keramik

Sisworo (Jurusan Teknik Mesin Politeknik Negeri Semarang)

Abstract


The process of cutting material is reshaped by cutting. Non conventional cutting process is needed to overcome the shortcomings in the previous process is conventional. For ceramic type material that has properties; hard, strong and setabil at high temperatures, but brittle and easily broken or cracked. Emphasis on the brittle material resulted in local crack follow devormasi elastic. With the abrasive water jet machining (AWJM) technology is cutting the material with tap 4.2 bar mixture of 70% water and 30% abrasive able to overcome the shortcomings of conventional process.

Keywords: AWJM, cutting of ceramic materials

Full Text:

PDF


DOI: http://dx.doi.org/10.32497/teknis.v11i1.680

Refbacks

  • There are currently no refbacks.


Alamat Redaksi

Politeknik Negeri Semarang, Unit Penelitian dan Pengabdian kepada Masyarakat

Jl. Prof. Sudarto, S.H., Tembalang Kotak Pos 6199/SMS Semarang 50061, Telp. 024-7473417, 7499585, 7499586 (hunting) eks. 113, Faks. 024-7472396. E-mail : teknis.polines@gmail.com, Web  : http://jurnal.polines.ac.id/jurnal/index.php/teknis, http://www.jurnalteknis.blogspot.com

View My Stats

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.