CONTROL AND MONITOR OF PRODUCT FILLING AUTOMATION SYSTEM IN PLC-BASED PACKAGING USING HMI OMRON NB7W-TW00B

Authors

  • Sri Kusumastuti Politeknik Negeri Semarang

DOI:

https://doi.org/10.32497/jaict.v7i2.3937

Keywords:

Electrical Engineering

Abstract

This study aims to design and create an automation system for filling products into packaging. PLC CP1E-N30DR-A system can be controlled and monitored via Omron NB7W-TW00B HMI. HMI programming using NB-Designer software. The product used is a steel ball. The number of steel balls is set via HMI.   The HMI screen display consists of inputs: Push Button Start, Push Button Stop, input the number of products in the packaging, packaging sensor, and steel ball sensor; outputs: conveyor and counter display. The test results show that HMI could provide variations in the number of products in the packaging. The present value counter can be displayed on the HMI. The control and monitor automation system of filling the product in the packaging worked well.  

References

. Bayu Muhari. Alat Pengepakan Produk Sesuai Ukuran Wadah. Prodi Teknik Elektronika, Jurusan Teknik Elektro, Politeknik Negeri Semarang. 2015.

. Gilang Wibisono. Kontrol dan monitor Otomasi Automatic Water Treatment System Berbasis PLC Menggunakan HMI Weintek MT8071iP. Jurnal Teknika,Vol. 6 No. 4 pp 149-156, Sekolah Tinggi Teknologi Warga Surakarta. 2020.

. Ristia C.N. Desain Pengepakan Barang Dengan Couter Otomatis Menggunakan PLC Omron. Jurnal Ilmiah Mahasiswa Kendali Listrik,Universitas Teknokrat Indonesia,Vol 1 No.2 pp.51-57 Bandarlampung. 2020.

. Widharma, I. G. S.,Wiraguna, M. A. A., Natalia, N. K. D., Bintang, R. D., & Nugraha, I. G. R. A. Otomatisasi Dalam Pandemi Dengan Sensor Proximity. Politeknik Negeri Bali. December.2020.

. Winahyu, R. K. K., Triwiyatno, A., & Setiyono, B. Desain HMI (Human Machine Interface) Omron Nb7w-Tw00b Pada Plant Filtrasi Menggunakan Modul Ultrafiltrasi. Transient: Jurnal Ilmiah Teknik Elektro, Vol. 4, No. 3, pp. 863-870. 2016.

Downloads

Published

2022-10-21

Issue

Vol. 7 No. 2 (2022)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).