MONITORING AND CONTROLLING TRAINER OF AUTOMATIC GRAIN DRYER MACHINE BASED ON PLC AND SCADA

Authors

  • Syahid, Mochamad Muqorrobin, Yusnan Badruzzaman, Setyoko, Nur Fatkhul Cholbi Politeknik Negeri Semarang

DOI:

https://doi.org/10.32497/jaict.v7i1.3456

Abstract

Grain drying is currently still using the traditional method of drying with solar thermal. One of the obstacles to rice production in Indonesia is the problem of the grain drying process. So far, Indonesian farmers still carry out traditional drying, only relying on the solar thermal to dry their grain, so that during the rainy season they will troubled in the drying process. Therefore, a trainer for a grain dryer machine with a small capacity is made so that it can be controlled by PLC and monitored using SCADA. The test results obtained that the weight of the grain before the 1000 gram test was tested with a drying time of 90 minutes, for the water content before drying was 18% after entering the drying process for 90 minutes, the weight of the grain became 927 grams and the water content after drying was 12.5%. At every 10 minutes the average weight loss of grain after the drying process is 5.9 grams and water content is 0.5%.

References

Bolton, William. 1996. Programmable Logic Control (PLC) : Sebuah Pengantar Edisi Ketiga. Jakarta : Erlangga.

Putra, Ramadhani. 2013. Tugas Akhir Rancang Bangun Alat Pengering Ikan Asin Otomatis Berbasis PL. Padang : Politeknik Negeri Padang.

Rahma, Dheta Ulzana Zizi, Ita Pratiwi, Jansonchia, Rendy Renaldy Firdaus. 2017. Screw Conveyor. Semarang : Universitas Diponegoro.

Sakka, Dewi Amaliah, Fauzan Rizqi Al-Haqim, Muhamad Bintang Saiful Ilham. 2019. Tugas Akhir Trainer Berbasis PLC dan SCADA Untuk Pengepresan Limbah Kertas Menjadi Parket Kertas. Semarang : Politeknik Negeri Semarang.

Sugiswan, Lisnoviantika. 2020. Analisis Monitoring Suhu Menggunakan Sensor RTD Pt100 Pada Mesin Elevator Di PT Eastrn Pearl Flour Mills. Makasar : Universitas Muhammadiyah Makasar.

Syahid, Subuh Pramono, Yusuf Herlambang. 2016. Pemanfaatan Teknologi Pengering Gabah Tipe Resirkulasi Di Desa Cepoko Sawit Kecamatan Sawit Kabupaten Boyolali.

https://amarnotes.wordpress.com/2013/06/29/apa-ituscada/ diakses tanggal 3 April 2021 pukul 10.36.

http://electricmechanic.blogspot.com/2012/09/proximity-switch-sensor- jarak.html?m=1diakses tanggal 13 Juli 2021 pukul 11.25.

https://id.scribd.com/doc/183470213/Bucket-Elevator diakses tanggal 13 Juli 2021 pukul 12.32.

https://aneka-pengering.com/mesin-pengering-padi-jagung-sistem-vertikal/ diakses pukul 5 Agustus 2021.

Downloads

Published

2022-03-14

Issue

Vol. 7 No. 1 (2022)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).