PENINGKATAN KEMAMPUAN MESIN CNC EMCO VMC-200 UNTUK MELAKUKAN PEMESINAN DENGAN PERUBAHAN SUDUT BENDA KERJA PADA SUMBU X-Y-Z

Anwar Sukito Ardjo, Timotius Anggit Kristiawan, Supandi Supandi, Supriyono Supriyono

Abstract


The CNC machine Emco VMC-200 in CNC laboratory of Jurusan Teknik Mesin Politeknik Negeri Semarang has a limited working area of 200 mm x 200 mm and the tool movement on the Z-axis, object movement on the X-axis and Y-axis. An increase in the working area of the machine has been made to 400 mm x 200 m in previous studies. The purpose of this research is to analyze and modify the workpiece clamping vise so that there is an increase in the ability to change the rotation angle of the workpiece with respect to the Y-axis, X-axis, and Z-axis. This research will apply Sighley's Mencahnical Engineering Design method which consists of the following stages: identification of need, definition of problem, synthesis, analysis & optimization, evaluation, and presentation. The results of this study obtained that the use of the angle vise used can overcome the limitations of the machine for gripping the workpiece and help to be able to work on the workpiece with a change in angle or the workpiece has a certain angle of inclination. Rotation capability on X-axis and Y-axis is 600 and Z-axis can rotate to 3600.


Keywords


CNC Emco VMC-200; rotation angle; Sighley’s Mencahnical Engineering Design

Full Text:

PDF

References


Ardjo, A. S., Rofarsyam, Anggraheni, V. S., An-Nizami, A., (2019). Rancang Bangun Fixture untuk Meningkatkan Daerah Kerja Mesin CNC EMCO VMC-200 di Laboratorium CNC. Seminar Nasional Hasil Penelitian dan Pengabdian Masyarakat Polines – 2019, 37-47.

Budynas, R. & Nisbett, K., (2015). Mechanical Engineering: Shigley’s Mechanical Engineering Design, 10 Edition. McGraw−Hill Primis. ISBN: 0−390−76487−6 Mechanical Engineering. http://www.primisonline.com.

Jaya, Dian. (2020). Pengertian Mesin CNC dan Jenis Mesin CNC https://ilmuteknik.id/pengertian-mesin-cnc-dan-jenis-mesin-cnc/ (diakses tanggal 21 maret 2021).

Budynas, R. & Nisbett, K., (2015). Mechanical Engineering: Shigley’s Mechanical Engineering Design, 10 Edition. McGraw−Hill Primis. ISBN: 0−390−76487−6 Mechanical Engineering. http://www.primisonline.com.

Priyanto, E., & Pramono, H. S. (2017). Proses Permesinan CNC dalam Pembelajaran Simulasi CNC. Jurnal Edukasi Elektro, Vol. 1, No1 1, 62-68.

Rahdiyanta, Dwi. Materi PPM Komponen Utama mesin milling CNC VMC -200 (Bagian Mekanik dan Pengendali Mesin CNC) (diakses tanggal 22 maret 2021 pukul 14:16 WIB).

Widarto. (2008). Teknik Permesinan Jilid II untuk Sekolah Menengah Kejuruan. Jakarta, Direktorat Pembinaan Sekolah Menengah Kejuruan, Direktorat Jenderal Manajemen Pendidikan Dasar dan Menengah, Departemen Pendidikan Nasional.


Refbacks

  • There are currently no refbacks.