ANALISIS HASIL PEMBUATAN PETA KONTUR DENGAN METODE POLIGON TERTUTUP MENGGUNAKAN PROGRAM SURFER 15 DI AREA GEDUNG DIREKTORAT POLITEKNIK NEGERI SEMARANG (AREA GEDUNG DIREKTORAT - PKM - GEDUNG SC - GEDUNG KERJA SAMA POLITEKNIK NEGERI SEMARANG)
ANALISIS HASIL PEMBUATAN PETA KONTUR DENGAN METODE POLIGON TERTUTUP MENGGUNAKAN PROGRAM SURFER 15 DI AREA GEDUNG DIREKTORAT POLITEKNIK NEGERI SEMARANG (AREA GEDUNG DIREKTORAT - PKM - GEDUNG SC - GEDUNG KERJA SAMA POLITEKNIK NEGERI SEMARANG)
DOI:
https://doi.org/10.32497/bangunrekaprima.v12i1.7508Keywords:
Contour Map, Closed Polygon, Surfer 15, Topography, Land Slope, Semarang State PolytechnicAbstract
This study aims to analyze the results of contour map creation using the closed polygon method through the Surfer 15 program in the area of the Semarang State Polytechnic Directorate Building, which includes the area of the Directorate Building - PKM - SC Building - Cooperation Building. Contour map creation was carried out to determine the topographic conditions and characteristics of the land slope in the area, which affect the planning and development of campus infrastructure. The methods used in this study include collecting coordinate and elevation data in the field, data processing using the closed polygon method to obtain high accuracy in positioning, and land surface modeling with Surfer 15 software. The results of data processing are presented in the form of contour maps and cross-sections and longitudinal sections, which are then analyzed to determine the level of land slope in each measurement segment. From the analysis results, it was found that the topography in the section of the Directorate Building - PKM - SC Building - Cooperation Building showed significant variations in height. Based on the measurement results, the slope of the land in the cross section A–A (Directorate–PKM) is 5.12%, section B–B (Directorate–PKM) is 3.59%, section C–C (Directorate–SC Building) is 7.94%, and the longitudinal section of the Tennis Court–Workshop Building has a slope of 2.44%. These values indicate that the research area has varying elevation differences, with a tendency of gentle to moderate slopes. Overall, the results of this study indicate that the closed polygon method and modeling with Surfer 15 are able to provide an accurate and detailed topographical picture of the land conditions in the Semarang State Polytechnic environment. This land slope information can be used to support spatial planning, drainage, and the development of more efficient and sustainable campus facilities.
References
Aji, Prima Trisna, dkk. (2024). Penerapan Model Pembelajaran Project Based Learning untuk Meningkatkan Hasil Belajar dan Kreativitas Peserta Didik. Jurnal Pendidikan Tambusai. https://doi.org/10.31004/jptam.v6i2.4726
Alves, M. A., Meneghini, I. R., Gaspar-Cunha, A., & Guimarães, F. G. (2023). Machine Learning-Driven Approach for Large Scale Decision Making with the Analytic Hierarchy Process. Mathematics, 11(3), 627. https://doi.org/10.3390/math11030627
Hamid, (2017). Metode Edutainmen. In Journal of Chemical Information and Modeling (Vol. 53). https://doi.org/10.1017/CBO9781107415324.004
Kusumadewi, Diah Ayu, M. Bisri. (2012). Arahan Spasial Teknologi Drainase Untuk Mereduksi Genangan Di Sub Daerah Aliran Sungai Watu Bagian Hilir. Jurnal Teknik Pengairan Vol 3, No 2 hal. 258–276
Rokhman, Nur. 2019. A Survey on Mixed-Attribute Outlier Detection Method. CommIT 13(1), 39-44.
Rubenstein, H. 1989. A Guide To Site And Environmental Planning. Utama Press
Sudaryono. (2019). Metode Penelitian Kuantitatif, Kualitatif, dan Mix Method (Edisi 2). Depok: Rajawali Pers.
Zhao, Zhangzhe, et al. (2025). The interbasin modulation from Indo-Pacific climate modes on the salinity transport through the Malacca Strait. Geoscience Letters, 12(1), 25. https://doi.org/10.1186/s40562-025-00415-4
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
The copyright of the received article shall be assigned to the journal as the publisher of the journal. The intended copyright includes the right to publish the article in various forms (including reprints). The journal maintains the publishing rights to the published articles.
This work is licensed under a Creative Commons Attribution 4.0 International License.
