PENGEMBANGAN LABORATORIUM KOMPUTER PERANCANGAN MESIN DENGAN PRINTER 3 DIMENSI (3D) TIPE FUSED DEPOSITION MODELLING (FDM)

Suharto Suharto, Eko Saputra, Paryono Paryono, Trio Setiyawan

Abstract


Printer of 3 Dimensional is a relatively new and practical technological innovation that can be used to make products from non-ferrous materials. This product can be a prototype of the design process. The purpose of research on 3D printers is as a means of education for the development of a computer laboratory for mechanical engineering design at the Semarang State Polytechnic. The method used in this research is to design, manufacture and test a 3D Printer Prototype of Fused Deposition Modeling (FDM) type, in which this 3D printer uses additive manufacturing (AM) principles or the addition of material layer by layer, using poly lactic acid filaments. (PLA) 1.75 mm in diameter as the material for the manufacture of the product. The results of the study of one unit of a 3-dimensional printer machine measuring 600x600x600 (mm), the results of testing a 3-dimensional printer that has been made that can produce a product in the form of a cube, a hollow block, and a beam with X, Y, Z axes with a print speed of 20-100 mm/s and product error percentage analysis ranged from 0.1% - 0.3%.


Keywords


prototype; 3-dimensional printer; fused deposition modeling

Full Text:

PDF

References


Amira Hasan Rahmawati, Himawan Setyo Wibisono,Rifqi Muhammad Yofatama, Niko Alif Saputra. 2019. Rancang Bangun Prototipe Printer 3 Dimensi (3D) Tipe Fused Deposition Modelling (FDM). Tugas Akhir Politeknik Negeri Semarang.

Budynas, Richard G dan J, Keith Nisbett. 2011. Shigley’s Mechanical Engineering Design Ninth Edition : The McGraw-Hill Companies.

Cahyono, Endi. 2017. Rancang Bangun Meja Mesin Plasma Cutting Dengan Gerak 3 Axis X, Y, Z Menggunakan Motor Stepper Berbasis Arduino: Institut Teknologi Sepuluh November Surabaya.

Khurmi, R.S dan J.K. Gupta. 2005. A Text Book Of Machine Design : Eurasia Publishing House Prakasa, Guntur Nanda. 2017. Prototipe Kunci Pintu Menggunakan Motor Stepper Berbasis Arduino Mega 2560 Dengan Perintah Suara Pada Android : Universitas Lampung.

Pratama, Fikri Galih, 2015. Makalah 3D printing, Universitas Gunadarma.

Rahman Hakim, Ihsan Saputra , Gilang Prabowo Utama , Yuris Setyoadi. (2019). Pengaruh Temperatur Nozzle dan Base Plate Pada Material PLA Terhadap Nilai Masa Jenis dan Kekasaran Permukaan Produk pada Mesin Leapfrog Creatr 3d Printer. Jurnal Teknologi dan Riset Terapan (JATRA), Politeknik Negeri Batam.

Ruswandi, Ayi dan Mochammad Arsyad Fauzan. Tanpa Tahun. Perancangan Extruder Mesin Rapid Prototyping Berbasis Fused Deposition Modeling (FDM) Untuk Material Filament Polylactic Acid (PLA) Diameter 1,75 mm: Politeknik Manufaktur Negeri Bandung.

Saxena, Abhishek, 2016. A Comprehensive Study on 3D Printing Technology, U.P., India,

Tambunan, Jonas Martua. 2014. Makalah Printer 3D: Institut Teknologi Sepuluh November Surabaya. Utama, Didi Widya dkk. 2017. Desain dan Aplikasi Sistem

Gerak Paralel, H Frame, Pemosisian Gerak Sumbu XY Pada Printer Tiga Dimensi : Universitas Tarumanegara Jakarta.

Yuda, Ardi Dara. 2017. Rancang Bangun Sistem Minimum Mekatronika Printer 3D Digital Light Processing (DLP) Institut Teknologi Sepuluh November Surabaya.


Refbacks

  • There are currently no refbacks.